Flysky FS-ST8 remote control with 8-10 channels FS-ST8 with 8 channel receiver.
Upgrade version - additional buttons/switches , return spring/adjustor for all gimbals and bracket for RF range extender.
FlySky's ST8 transmitter will quickly become your new best friend when controlling RC models. Through the countless possibilities, the remote control can be set up optimally to your own needs. A built-in STM32 chip of the new G series also provides the necessary technical performance. Simple and intuitively designed, this transmitter with 8 to 10 channels is suitable for beginners and more experienced modelers alike. All functions can be set and adjusted in the menu, freely assign the switches, limit servo travels and mix channels. Mode 1-4 can be set. The ST8 is fully compatible with all Flysky sensors and the GPS module, the data is shown in the display. The connection of an additional external antenna is provided. Via the USB-C port, the APP FlySky Assistant 3.0 can be used for firmware updates and settings can be stored on the PC. An emergency power supply is also possible via the USB port if the battery fails prematurely. Funke can be personalized via the built-in RGB Ambient Light, the stick housings are transparent additional illumination of the sticks with LED would be possible.
In the normal version are 2 sticks gimbal available, 2 knobs, 3 switches and a 2-step switch. This upgrade version has additional 2 buttons on the back and two rotary wheels with zero position on front side. In the set also an additional return spring and brake for the second stick.
The control works in the 2.4Ghz band with ISM technology and ANT protocol. All receivers that can handle the ANT protocol can be bound. The range of the control is about 1000m in the air, over water much shorter.
In the set is the 8 channel receiver FS-SR8 which can output signals in PWM, PPM, I.Bus and s.Bus.
The manual and menu are in English, a quick start guide in German is included in the set.
For operation 4 AA cells or a small 2S Lipo pack with JST connector are necessary. (not included)
Features
-ergonomic design and high quality workmanship
-free assignment of switches and buttons
-Mode 1-4 adjustable
-display for telemetry (voltage, altitude, temperature ... depending on the sensor in the model)
-Memory for 20 models
-RGB illumination
-Dual antenna
-channels 8-10
-Update via USB possible
