Skip to main content Skip to search Skip to navigation
Raboesch – Model boat propellers and...

Raboesch

Raboesch – Propellers and propulsion technology for RC model boats

Raboesch Models from the Netherlands manufactures components for fully functional model boat construction. Our range includes, amongst other things, brass propellers, propeller shaft systems, side thrusters, couplings and rudder accessories. When making your selection, it is not only the dimensions that are crucial, but also how well the propeller is matched to your model’s motor, hull and handling characteristics.

Raboesch propellers: The blade shape makes all the difference

Raboesch offers propellers with different numbers of blades and geometries. The A-type design is based on classic ship propellers and is suitable, for example, for historic motor vessels or tugs. The D-type propellers have comparatively large blade areas; they are available for motor yachts, steamships and fishing boats, amongst others. C-type propellers with more strongly swept-back blades (skewed design) are visually and structurally suited to various more modern types of vessel. However, the design alone does not determine suitability for a particular engine or the achievable speed.

One example from our range is the Raboesch D-Type with three blades, a 35 mm diameter and an M4 thread in the L version. For larger models, we stock, amongst others, the D-Type propeller with a 40 mm diameter and M4 thread. The appropriate diameter depends in particular on the available space within the hull, the motor characteristics and the desired speed.

Correctly matching diameter, pitch, thread and direction of rotation

The propeller diameter influences the space required and the load on the drive. The pitch describes the theoretical distance travelled per revolution; the actual speed achieved also depends on slip and the resistance of the model boat. Blade area and the number of blades also affect the load on the motor. A larger propeller is therefore not automatically the better choice.

Before ordering, check the shaft thread – Raboesch offers M2, M3, M4 and M5, amongst others, depending on the propeller – as well as the L or R marking for the direction of rotation. In twin-screw systems, the propellers, motor rotation direction and desired direction of rotation must be compatible with one another. The Raboesch catalogue also specifies the maximum permissible speeds for the individual propeller sizes. These limits are particularly important when combined with high-speed engines.

Raboesch shaft systems: bearings, seals and installation length

To transmit the motor power, we stock marine shafts and shaft assemblies in various designs. The Raboesch range includes stainless steel shafts with stern tubes made of ABS or brass, as well as versions with plain or ball bearings. Certain sealed series use G-rings and a rear bearing made of Delrin. The details vary depending on the item and may not apply to every Raboesch shaft assembly.

For installation, the position of the engine, the exit angle at the hull, the diameter of the stern tube and the distance to the ship’s propeller are decisive factors. Cuttable variants, such as the 290/M4 shaft assembly in our range, can be adapted to the required installation space; however, the bearing position, seals and the required thread length must be maintained. Careful alignment between the motor and the shaft protects the bearings and prevents unnecessary vibrations. You can also find suitable components for shaft assembly under Bearings, seals and shaft accessories.

Transverse thrusters for tugs, workboats and yachts

A Raboesch transverse thruster can generate additional lateral steering effect at the bow when travelling at low speed. The more compact versions operate with a motor-driven impeller that pumps water through the side pipes. When planning, it is not just the pipe diameter that matters: motor height, housing width, hull shape and accessibility for maintenance work must also be taken into account.

The Raboesch side-jet thruster with a 12 mm external pipe diameter is of interest for confined installation spaces; according to the manufacturer’s catalogue, size 108-20 is powered by a Blue-RM-130 brush motor. The larger variants, such as the thruster with an outer tube diameter of 16 mm, use a different motor and housing size. The operating voltage, control system and power requirements must therefore be checked separately for the selected model. Further sizes and accessories can be found in our thruster category.

Couplings, rudders and spare parts

When assembling a propulsion system, the smaller connecting parts are also important. Raboesch offers, for example, universal joints, brass inserts for various shaft diameters, rudder levers, rudder assemblies, as well as seal and bearing components. A cardan universal joint can compensate for the angular misalignment inherent in the design, but it is no substitute for careful alignment of the shaft system. When ordering spare parts, please ensure you quote the relevant Raboesch item number and the dimensions of the existing assembly.

If you are selecting a ship’s propeller, shaft system or side thruster for your model kit, we can assist you in matching the propeller diameter and direction of rotation, motorisation, speed controller, shaft and coupling dimensions, as well as the appropriate battery, remote control and mounting accessories. Please let us know, if possible, the model of the boat, the scale and the propulsion components you already have – this will help us narrow down the selection more precisely.