MJX Hyper GO 14212 – 1:14 brushless 4WD truggy, ready-to-run (RTR), with a top speed of up to 56 km/h
The MJX Hyper GO 14212 is a compact and powerful 1:14 scale 4WD brushless truggy that offers the performance and technology of larger RC bashers in a particularly handy format. With a top speed of up to 56 km/h, a powerful brushless motor, permanent four-wheel drive and a drivetrain largely constructed from metal, the Hyper GO 14212 is designed for both fast driving on hard surfaces and excursions on gravel, earth or short-cut grass.
Thanks to its compact dimensions, the truggy takes up significantly less space than classic 1:8 or 1:10 scale vehicles. This makes it ideal for smaller tracks, car parks or your own garden, without having to compromise on the typical dynamism of a high-performance RC off-road model.
Powerful brushless drive
Propulsion is provided by a 2852 brushless motor, which is fitted with an aluminium heat sink and an active fan. The motor cooling system helps to keep temperatures under control, even during longer runs and under heavy load.
The motor is controlled by an E45P 45A brushless speed controller, which is designed for use with 2S and 3S LiPo batteries. The standard package includes a powerful 7.4 V 3000 mAh 25C LiPo battery, with which the Hyper GO 14212 can reach speeds of up to approximately 56 km/h.
This means that, straight out of the box, this small truggy offers performance that is significantly higher than that of typical entry-level RC vehicles in this size class.
Robust metal 4WD drivetrain
A key feature of the MJX Hyper GO 14212 is its drivetrain, which is designed for high load-bearing capacity. The power from the brushless motor is transmitted to all four wheels via the permanent 4WD all-wheel drive system.
Components used include metal cardan shafts, metal CVD drive shafts, chrome steel gear wheels and metal differentials. In addition, the vehicle is fitted with ball bearings throughout.
This robust construction is particularly advantageous in a fast brushless model, as considerable forces act on the drivetrain during acceleration, jumps and on uneven terrain.
Aluminium oil-filled shock absorbers for controlled handling
Four oil-filled aluminium shock absorbers ensure controlled suspension and help to reliably absorb bumps. Compared to simple friction dampers, this allows the vehicle to move much more smoothly and precisely, particularly on gravel and uneven terrain.
The large tyres, with a diameter of around 94 mm, combined with the off-road set-up, ensure good ground clearance and sufficient grip on a wide variety of surfaces.
Proportional 2.4 GHz remote control
The MJX T3D 2.4 GHz remote control is included in the scope of delivery. The throttle and steering are fully proportional, enabling both slow manoeuvring and rapid changes of direction with precision.
The range is specified as approximately 120 metres. Throttle and steering can be adjusted using the corresponding trim functions.
For the steering, MJX uses a 19 g digital servo with metal gear and 2.2 kg/cm of torque.
RTR – delivered almost ready to run
The Hyper GO 14212 is supplied as an RTR model – Ready to Run – and is largely ready to run. The driving battery, remote control and USB charging cable are already included in the scope of delivery.
A special feature is the second, pre-painted body, which can be used either as a spare or to quickly change the car’s appearance.
In addition, MJX includes various spare parts and accessories. These include, amongst other things, wishbones, additional shock springs, body clips, a wheelie bar and various tools.
To get started, all you need are 2 AA batteries for the remote control.
Who is the MJX Hyper GO 14212 suitable for?
The MJX Hyper GO 14212 is ideal for RC drivers looking for a small, fast and robustly built brushless off-road vehicle. Thanks to its 1:14 scale, the model is easy to transport and can be used even where there is limited space for larger 1:8 or 1:10 vehicles.
At the same time, the brushless motor, four-wheel drive, metal drivetrain and oil-filled shock absorbers ensure that the Hyper GO is, in technical terms, much closer to a classic hobby RC car than to a simple toy vehicle.
Contents
Pre-assembled MJX Hyper GO 14212 Brushless Truggy
T3D 2.4 GHz radio control
7.4 V 3000 mAh 25C LiPo battery pack
USB charging cable
Second painted body
Rear wing unit
Wheelie bar
Spare front upper and lower control arms, left and right
Additional shock springs
Body clips
Front and rear body mounts
Hex keys and other tools
Screwdriver
User manual
Also required: 2 AA batteries for the remote control.
Technical specifications
Vehicle type: Brushless truggy
Version: RTR – Ready to Run
Scale: 1:14
Drive: 4WD all-wheel drive
Wheelbase: approx. 198 mm
Track width: approx. 195 mm
Tyre diameter: approx. 94 mm
Vehicle weight: approx. 1350 g