Products from Krick
Krick Modellbau – Tradition, Innovation, and Strong Own Brands
Founded in 1953, Krick Modelltechnik is a leading German manufacturer combining heritage, precision, and innovation. The company offers a wide range of RC ship models, wooden kits, steam engines, and accessories.
Ship Models & Kits
From historic steamships to modern tugboats and classic fishing vessels, Krick kits are crafted with wooden parts for stability and brass photo-etched fittings for realism. All models and kits are available directly in our shop.
Steam Engines & Accessories
Krick is also famous for its steam engines, ideal for powering historic ship models. In addition, our shop offers a wide range of accessories such as fittings, RC drive systems, servos, paints, and adhesives.
Krick’s Own Brands
-
romarin by krick – continuing Robbe’s ship model tradition with updated kits.
-
Krick accessory lines – electronics, servos, paints, adhesives, and detail parts.
-
LaserCut & wooden kits – precision-engineered sets under the Krick label.
Conclusion
Krick represents German craftsmanship and modern technology. In our shop, you can conveniently purchase the full range of Krick ship models, steam engines, and accessories – everything you need to realize your next model building project.
No results were found for the filter!
Radaranlage Berlin 80mm Radargerät Typ Berlin Radarbalken Bausatz mit Motorattrappe. Technische Daten Breite ca. 80 mm Maßstab 1:25
7.50€ *
Trim Tab Set Trim tab set Kit for two adjustable trim tabs with which you can adjust the model's attitude. When installed, the angle is infinitely adjustable via the right/left thread. Suitable for racing boats and faster model ships. Package contents 2 pieces Technical data Width approx. 23 mm Total length approx. 32 mm.
18.50€ *
Abdampfkondensator Anna Abdampfkondensator Anna Neue Version. Der Artikel passt, sowohl als Zubehör für die Dampfmaschine Anna, als auch für den Nachfolger der Dampfmaschine Anna 2. Abdampfkondensatoren dienen dazu, dass der aus einer Dampfmaschine austretende Abdampf, der mit Öl gemischt ist, nicht einfach in die Umwelt entweicht. Der Kondensator lässt den...
53.00€ *
Dampfmaschinenöl Heißdampf Öl für Modell Dampfmaschinen Dampfmaschinen können nicht mit normalem Motoren- oder Fahrrad Öl geschmiert werden. Die Dampfhitze löst sofort normales Schmieröl auf, welches dann verseift. Dampfmaschinenöl ist hitzebeständig und schmiert Kolben und Zylinder während der Dampf durch die Maschine strömt. Krick Heißdampf Öl in...
Content 50 Milliliter (7.80€ * / 100 Milliliter)
3.90€ *
MAX Inrunner 3660 Brushless 1900 KV MAX Inrunner 3660 1900 KV BL The brushless motors in the MAX Runner series are suitable for use as a drive for model boats. These internal rotor motors are high-speed and suitable for use in racing boats or as a motor for sports boats and yachts. They are fastened with two screws and are no different from conventional motors. The...
75.00€ *
metal wheels for sail winch servos 30mm Windentrommel für Segelwinde Windforce Passend für alle Windforce Segelwinden und Servos mit 25er Verzahnung Lieferumfang: Windentrommel Kerndurchmesser 30 mm
12.95€ *
wheel for sail winch servos Windentrommel für Segelwinde Windforce Lieferumfang: Segelwinde Windentrommel mit Führung Kleinteile zur Befestigung
9.90€ *
Ship Deck Pear 3mm Finished boat deck pear/black These real wood planks are glued and sanded together from individual layers of wood of different colours. Particularly suitable for prototypical and visually appealing boat decks. Each plank has a narrower plank on one side so that the next plank can be easily attached if wider decks are required. Wood...
Content 0.0931 Quadratmeter (278.20€ * / 1 Quadratmeter)
25.90€ *
Ship Deck Pear 7mm Finished boat deck pear/black These real wood planks are glued and sanded together from individual layers of wood of different colours. Particularly suitable for prototypical and visually appealing boat decks. Each plank has a narrower plank on one side so that the next plank can be easily attached if wider decks are required. Wood...
Content 0.0931 Quadratmeter (278.20€ * / 1 Quadratmeter)
25.90€ *
Folkeboot RC Sailing Ship Kit Folkeboat RC sailing ship kit Manufacturer Krick Modellbau History of the original: The Nordic Folkeboat has its origins in 1941. At a time marked by World War II, the Scandinavian Sailing Association launched a competition. The aim was to develop a simple, robust, and inexpensive sailing boat for recreational sailing and regattas – a...
339.95€ *
Ballast keel for RC Folkeboot Ballast keel for RC Folkeboot Moulded ballast keel for the Folkeboot on a scale of 1:7.6. This ballast keel is required for the model and must be ordered separately from the Folkeboot 20390 to obtain a complete model. Due to its heavy weight, the ballast keel is not offered together with the kit. The keel has threaded rods already...
129.00€ *
Folkeboot Conversion Kit Folkeboot jib conversion kit The conversion kit for boomless jib with large jib sail and blocks requires 2 additional sail winches, item no. 79074. For this version we recommend a remote control with at least 4 channels and dual rate function in order to be able to adjust the sheet travel precisely.
49.00€ *
Long Fender 62mm Long fenders 62 mm Fenders can be found on practically every ship in various shapes and sizes. These long fenders have two eyelets for the fastening lines. The fenders are made from two halves in resin. They are therefore hollow and light. The halves only need to be glued together, sanded down and painted in the desired colour. Such...
11.90€ *
Long Fender 40mm Long fenders 40 mm Fenders can be found on practically every ship in various shapes and sizes. These long fenders have two eyelets for the fastening lines. The fenders are made from two halves in resin. They are therefore hollow and light. The halves only need to be glued together, sanded down and painted in the desired colour. Such...
5.90€ *
Long Fender 50mm Long fenders 50 mm Fenders can be found on practically every ship in various shapes and sizes. These long fenders have two eyelets for the fastening lines. The fenders are made from two halves in resin. They are therefore hollow and light. The halves only need to be glued together, sanded down and painted in the desired colour. Such...
8.90€ *
Long Fender 75 mm Long fenders 575mm Fenders can be found on practically every ship in various shapes and sizes. These long fenders have two eyelets for the fastening lines. The fenders are made from two halves in resin. They are therefore hollow and light. The halves only need to be glued together, sanded down and painted in the desired colour. Such...
14.90€ *
Long Fender 41x26mm Convex fender 41x26 mm Fenders can be found on practically every ship in various shapes and sizes. The ball fenders have an eyelet at the top for the fastening rope. Technical data Total length approx. 41 mm Diameter approx. 26 mm
8.90€ *
Long Fender 64x40mm Convex fender 64x40mm Fenders can be found on practically every ship in various shapes and sizes. The ball fenders have an eyelet at the top for the fastening rope. Technical data Total length approx. 64 mm Diameter approx. 40 mm
14.90€ *
Long Fender 51x32mm Convex fender 51x32mm Fenders can be found on practically every ship in various shapes and sizes. The ball fenders have an eyelet at the top for the fastening rope. Technical data Total length approx. 51 mm Diameter approx. 32 mm
11.95€ *
Long Fender 25x16mm Convex fender 25x16mm Fenders can be found on practically every ship in various shapes and sizes. The ball fenders have an eyelet at the top for the fastening rope. Technical data Total length approx. 25 mm Diameter approx. 16 mm
3.90€ *
3-Blade 35mm R M4 Propeller Dynamic 3-blade propeller made of glass-fibre reinforced plastic. Technical data Number of blades 3 Diameter 35 mm M4 thread Direction of rotation: right Pitch 30 mm
2.95€ *
Sail Set Le Tonnant Set of sails for Le Tonnant Pre-sewn set of sails for the Le Tonnant kit, scale 1:50. Item no. 20100 from COREL. The finished sail sets are carefully pre-sewn and hemmed at the edge. They are provided with longer pieces of linen at the corners for fastening. The sails can simply be ironed into shape and stretched and ironed to the...
49.00€ *
Hinge Piece gate hinges (10 pieces) Brass hinge for holding the gun ports. Scope of delivery 10 hinges 10 bolts eyebolts Total length approx. 20 mm Width approx. 3 mm
5.00€ *
Gun Port 8x8 8x8mm piece gun port complete (10 pcs.) Port holes with frame and movable cover made of metal, darkly burnished Packing unit: 10 pieces. Lid size 8x8 mm Insertion dimension 9x9 mm Internal dimensions 7.5x7.5 mm external dimensions 10x12 mm
9.00€ *
Gun Port 14x14 piece gun port complete (10 pcs.) Port holes with frame and movable cover made of metal, darkly burnished Packing unit: 10 pieces. Lid size 13x13 mm Insertion dimension 14x14 mm Internal dimensions 11x11 mm external dimensions 17x19 mm
9.00€ *
Gun Port 10x10 piece gun port complete (10 pcs.) Port holes with frame and movable cover made of metal, darkly burnished Packing unit: 10 pieces. Lid size 10x10 mm Insertion dimension 10.5x10.5 mm Internal dimensions 8.5x8.5 mm external dimensions 12.5x14 mm
9.00€ *
Lifebelt 12x12 mm Life belt 12 x 12 mm (10) Type 1 plastic lifebuoys. Enamel or acrylic paints are suitable for painting. VE = 10 lifebuoys Ring diameter 10 mm Outer dimensions 12 x 12 mm Inner dimensions 6 x 6 mm Thickness 1.5 mm Scale 1:100 to
4.35€ *
Brass nails 0.7x12mm countersunk. (approx. 100... Brass nails 0.7x12mm countersunk. (approx. 100 pcs.) Technical data Material hard brass Pin Ø approx. 0.7 mm Length approx. 12 mm Head Ø approx. 1.5 mm Countersunk head shape
From 6.40€ *
belaying pin wood 8 mm (10) belaying pin wood 8 mm (10) belaying pin for nailing benches for covering linen. Quantity per packaging unit 10 pieces Length approx. 8 mm Material wood
2.15€ *
belaying pin wood 18 mm (10) belaying pin wood 18 mm (10) belaying pin for nailing benches for covering linen. Quantity per packaging unit 10 pieces Length approx. 8 mm Material wood
2.15€ *
Railing supports 68mm (10 pieces) Railing supports 8 mm (10 pieces) Balustrade supports turned from walnut wood. Height 6 mm Diameter approx. 3 mm Content of the packaging unit 10 pieces Available in the sizes Item no. |60781| 6 mm high PU 10 pieces |60782| 8 mm high PU 10 pieces |60790| 10 mm high PU 10 pieces |60791| 12 mm high PU 10 pieces |60792| 14 mm high PU 10...
2.15€ *
Railing supports 6 mm (10 pieces) Railing supports 6 mm (10 pieces) Balustrade supports turned from walnut wood. Height 6 mm Diameter approx. 3 mm Content of the packaging unit 10 pieces Available in the sizes Item no. |60781| 6 mm high PU 10 pieces |60782| 8 mm high PU 10 pieces |60790| 10 mm high PU 10 pieces |60791| 12 mm high PU 10 pieces |60792| 14 mm high PU 10...
2.15€ *
Klemmschieber Klemmschieber Klemmschieber mit 3 Bohrungen zum Spannen von Wanten. Packungsinhalt 10 Stück Farbe rot Maße 5x15 mm Bohrungen 1mm
2.50€ *
Takellitze Ø0.8 mm 10m stainless steel Takellitze D0.5 10m stainless steel Flexible take-up strand for bracing masts on sailing boats. The steel cable is made from almost 50 individual wires. Length approx. 10 m Diameter approx. 0.8 mm Material V4A stainless steel
11.50€ *
Crimping sleeves D2mm Crimp sleeves for take-up strands 20 pieces The crimp sleeve can be used to create force-fit connections between the steel cable and the fastening eyelets. For example, on shrouds for fixing masts on RC sailing boats. With the 2 mm inner diameter size, a 1 mm steel cable can be passed through two times and closed with the aid of flat...
4.95€ *
Viewed