No results were found for the filter!
Pulley Brass 2.5mm Precise brass pulley, hole for shaft 1 mm dia. Content of package: 10 pcs
3.00€ *
Turnbuckle M1.2 x 15/20 Turnbuckle M1.2 x 15/20 Turnbuckle or eyebolt ..... made of brass. With left/right thread the length of the shroud turnbuckle changes. Thus shrouds, ropes or cables can be easily tensioned. Scope of delivery 1 piece Technical data Thread...
2.00€ *
Copper pipe soft 3x2mm 1m ring Copper tube soft 3x2mm 1m ring Soft copper tube for individual production of steam pipes or cooling coils. Delivery 1 m rolled Dimensions Outer-Ø 3 mm Inner-Ø 2 mm Length 1000 mm
11.95€ *
magnets 12 x 7 x 2 mm Extremely strong magnets 12 x 7 x 2 mm. Square magnet neodymium, nickel-plated with high temperature resistance and holding force of approx. 1kg. 10 pcs
7.90€ *
Quicrun Fusion SE Brushless Motor/Controler 1200kV Hobbywing Quicrun Fusion SE 1200kV Motor and controller combined in one housing ! This brushless controller and motor combination is already the second improved version of the Quicrun Fusion. The Quicrun Fusion SE is just about the size...
75.90€ *
AKL-8-W Terminal Block The AKL-8-W connection terminal enables convenient connection of LEDs and other consumers to the switching outputs of all common Beier Electronic switching modules. The module is NOT an extension of functions but merely a way of quickly...
18.95€ *
Brass Pulley 5mm Precise brass pulley, hole for shaft 1.5 mm dia. Content of package: 10 pcs
3.00€ *
Brass Pulley 6mm Precise brass pulley, hole for shaft 1.5 mm dia. Content of package: 10 pcs
3.00€ *
Set Collar 3mm Set collar 3 mm inside diameter Package contents: 5 Set collar with set screws and Allen key Technical data Inner diameter 3.1 mm Outer diameter 8 mm Width 5 mm
3.20€ *
Set Collar 5mm Set collar 5mm inside diameter Package contents: 5 Set collar with set screws and Allen key Technical data Inner diameter 5.1 mm Outer diameter 10 mm Width 5 mm
3.50€ *
Race 400 6V DC Motor Race 400 6V electric motor Inexpensive, robust electric motor. Suitable both in direct drive and with gearbox for single and multi-motor models. With the appropriate accessories such as motor mounts, gear sets and ball bearings, any...
10.60€ *
Running Hardware Riva Aquarama V2 brushless A beautiful Riva model necessarily needs a powerful drive. With this set we have put together a drive that is fast but does not go to the limits of what is technically possible. The shafts are mounted on two bearings and are absolutely...
319.95€ *
Boost 60 490KV Brushless Motor Boost 60 Brushless Motor from Pichler Modellbau High quality external rotor brushless motor for large models. The motor is designed with 15 years of experience in model building and the claim to use only high-quality materials....
105.00€ *
Boost 50 610KV Brushless Motor Boost 50 Brushless Motor from Pichler Modellbau High quality external rotor brushless motor for large models. The motor is designed with 15 years of experience in model building and the claim to use only high-quality materials....
97.00€ *
Boost 80 320KV Brushless Motor Boost 50 Brushless Motor from Pichler Modellbau High quality external rotor brushless motor for large models. The motor is designed with 15 years of experience in model building and the claim to use only high-quality materials....
119.00€ *
ESC 90 Smart RC Speed Controller The ISDT ESC 90 is a high quality speed controller (ESC) for use in RC models such as cars, rock crawlers and of course model boats that need to be controlled sensitively. The ESC 90 has a high current capability of up to 90(180) amps...
29.99€ *
ESC 70 Smart RC Speed Controller The ISDT ESC 70 is a high quality speed controller (ESC) for use in RC models such as cars, rock crawlers and of course model boats that need to be controlled sensitively. The ESC 70 has a high current capability of up to 70(120) amps...
27.49€ *
Model Stand Flying Dutchman Exclusive model stand for the Flying Dutchman ship model by Occre. The kit contains the following parts: - MDF wood - 2 brass tentacles - instructions Dimensions: Length: 300 mm width: 150 mm Height: 95 mm
45.00€ *
Disc Magnet 10x2mm Extremely strong magnets diameter 10x2 mm. Disc magnet neodymium, nickel-plated with high temperature resistance and holding force of approx. 1,1kg. 10 pcs
5.95€ *
Fittings Set Torben Fittings set for the Torben harbour tugboat. Consisting of: -60 mm cast metal tow bar -15 x 40 mm metal anchor winch -30 mm green/red 6 V metal position light, illuminable -8 car tyre fenders, 32 mm -4 metal double bollards -2 metal...
135.00€ *
Search Light Kit Searchlight kit Kit of a modern searchlight made of etched nickel silver parts. Matching LED included in the set. The searchlight can be controlled by servos and can be turned and swivelled. Reflector approx. 18mm The headlight can be...
20.70€ *
High Power LED Headlight High Power LED Headlight Ultra bright LED headlight pair with electronic switch, pre-wired. Can be connected AND switched immediately to a free channel of the remote control. An additional switch module is not necessary. Technical data:...
17.90€ *
Grating 55mm Originally, wooden gratings were used to safely cover hatches in the deck of ships, while fresh air and light could pass through. The set consists of 30 pieces of laser cut strips that can be assembled into a cover of maximum 55x55mm....
2.95€ *
Cannon Portholes 8x8mm Piece ports (also gun ports) are closable openings in the side of warships through which cannons placed inside the ship, the pieces, could fire. Reproduction of a piece port for cutouts inner size 8x8mm made of metal movable. Scope of...
2.95€ *
Compact Boat Shaft 400/175 M4 Compact boat shaft with a very good price/performance ratio. The particularly slim design should be emphasised. The motor can be mounted quickly and easily with a rigid direct coupling via the aluminium motor flange. The shaft is made of...
16.50€ *
Wantenspanner M1,2 x 13/18 Wantenspanner M1,2 x 13/18 Wantenspanner, Spannschloß oder Ösenschraube ..... aus Messing. Mit links/rechts Gewinde verändert sich die Länge des Wantenspanners. So können Wanten, Seile, Taue oder Züge einfach gespannt werden....
1.65€ *
Turnbuckle M2 x 22/35 Shroud turnbuckle M2 x 22/35 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1 piece...
1.55€ *
Shroud Turnbuckle M2 x 21/31 Shroud turnbuckle M2 x 21/31 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1 piece...
1.65€ *
Shroud Turnbuckle M2 x 21/31 Shroud turnbuckle M2 x 21/31 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1 piece...
1.60€ *
Shroud Turnbuckle M2.5 x 27/43 Shroud turnbuckle M2.5 x 27/43 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1...
1.60€ *
Shroud Turnbuckle M2.5 x 32/49 Shroud turnbuckle M2.5 x 32/49 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1...
1.70€ *
Sail kit Prins Willem Sail kit Prins Willem Ready made sail set for the Sovereign of the Seas kit. Blocks, rings and rigging twine for rigging the sails are neither included in the kit nor in the sail set and must be purchased separately.
49.00€ *
Conversion Kit Billing Boats Mini Series Conversion kit to RC model for the Billing Boats Mini series. The kit contains a 2mm shaft system that can be shortened. We also supply a sealed rudder system and a small DC motor with hose coupling to the shaft. The motor can be...
19.90€ *
Sail Set Hunter Mamoli Sail Set Hunter Mamoli Finished sail set for the Hunter 1/72nd scale kit. The finished sail sets are carefully pre-sewn and hemmed at the edges. There are small loops at the corners of the sails for attaching the lines. The sails can be...
31.00€ *
Sail Set Gretel Mamoli Sail Set Gretel Mamoli Finished sail set for the Gretel1/54nd scale kit. The finished sail sets are carefully pre-sewn and hemmed at the edges. There are small loops at the corners of the sails for attaching the lines. The sails can be...
27.00€ *
Sail Set America Mamoli Sail Set America Mamoli Finished sail set for the America 1/64nd scale kit. The finished sail sets are carefully pre-sewn and hemmed at the edges. There are small loops at the corners of the sails for attaching the lines. The sails can...
28.50€ *
Viewed