Products from Krick
Krick Modellbau – Tradition, Innovation, and Strong Own Brands
Founded in 1953, Krick Modelltechnik is a leading German manufacturer combining heritage, precision, and innovation. The company offers a wide range of RC ship models, wooden kits, steam engines, and accessories.
Ship Models & Kits
From historic steamships to modern tugboats and classic fishing vessels, Krick kits are crafted with wooden parts for stability and brass photo-etched fittings for realism. All models and kits are available directly in our shop.
Steam Engines & Accessories
Krick is also famous for its steam engines, ideal for powering historic ship models. In addition, our shop offers a wide range of accessories such as fittings, RC drive systems, servos, paints, and adhesives.
Krick’s Own Brands
-
romarin by krick – continuing Robbe’s ship model tradition with updated kits.
-
Krick accessory lines – electronics, servos, paints, adhesives, and detail parts.
-
LaserCut & wooden kits – precision-engineered sets under the Krick label.
Conclusion
Krick represents German craftsmanship and modern technology. In our shop, you can conveniently purchase the full range of Krick ship models, steam engines, and accessories – everything you need to realize your next model building project.
No results were found for the filter!
MAX Marine Brushless Motor 910 KV MAX Marine P359 Brushless Motor 910 KV langsam laufender Brushless Motor für Modellschiffe Ersatz für 800 Speed Motore
33.00€ *
Shaft Grease 80g Shaft grease tube with 80g Grease with good adhesion and resistant to water, acids and alkalis. Ideal for greasing ship shafts, prevents water from entering through the stern tube. - Extremely water resistant - Wide temperature application range from -10°C to +130°C - Friction and wear are reduced to a minimum by special additives -...
Content 80 Gramm (11.88€ * / 100 Gramm)
9.50€ *
Bullaugen mit Flansch 10mm Bullaugen mit Flansch 10 mm Hochwertige Bullaugen aus gedrehtem Messing und gebohrten Nietlöchern und Glas. Lieferumfang: Packung mit 10 Stück Technische Daten Außen-Durchmesser 10 mm Innen-Durchmesser 6 mm
9.90€ *
Bullaugen mit Flansch 12mm Bullaugen mit Flansch 12 mm Hochwertige Bullaugen aus gedrehtem Messing und gebohrten Nietlöchern und Glas. Lieferumfang: Packung mit 10 Stück Technische Daten Außen-Durchmesser 12 mm Innen-Durchmesser 8 mm
9.90€ *
Bullaugen mit Flansch 8mm Bullaugen mit Flansch 8 mm Hochwertige Bullaugen aus gedrehtem Messing und gebohrten Nietlöchern und Glas. Lieferumfang: Packung mit 10 Stück Technische Daten Außen-Durchmesser 8 mm Innen-Durchmesser 5 mm
8.30€ *
Bullaugen 6mm Bullaugen 6mm Hochwertige Bullaugen aus gedrehtem Messing. Packung mit 10 Stück Inhalt. Technische Daten Außen-Durchmesser 6 mm Innen-Durchmesser 4 mm
8.30€ *
Brass Stanchions 10 mm Brass stanchions 10 mm With 1 passages and a height above deck of 10 mm. Ball diameter 2 mm for 0.5 mm wire. Quantity per packaging unit 10 pcs
5.40€ *
Brass stanchions 30 mm Brass stanchions 30 mm With 1 passages and a height above deck of 30 mm. Ball diameter 3 mm for 1 mm wire. Quantity per packaging unit 10 pcs
5.80€ *
Carbon-Hydropropeller K-Serie 3Bl. 33mm R M4 Carbon Hydropropeller “K-Serie” aus kohlefaserverstärktem Polyamid mit metrischem Gewindeeinsatz M4 und mit 3 Flügeln. Steigung ca. 1,4 x Schrauben-Ø. Laufrichtung vom Motor aus gesehen.
5.10€ *
Grundplatte 300x100x20mm Grundplatte 300x100x20 mm dunkles Vollholz Diese Grundplatten geben Ihrem Schiffsmodell erst die richtige maritime, edle Aufwertung. Derartige Platten mit der sauber gefrästen Zierkante sollten nicht zu groß gewählt werden, damit sie Ihr Modell nicht überlagert aber dem Modell eine optische Basis und einen guten Stand bietet. Die...
23.95€ *
Abrasive belts 20mm Replacement belts 20 mm wide (3) Replacement sanding belts for sanding mice. The package contains one spare belt each with 150, 240 and 320 grit.
7.20€ *
Anlenkhebel T-Anlenkhebel passend für Wellen mit 3 oder 4mm Durchmesser. Zum Anlenken von Schiffsrudern, einschenkligen steuerbaren Bugfahrwerken und für ähnliche Anwendungsfälle. Maximaler Abstand des Anlenkpunktes zur Mittelachse 30 mm. Nicht benötigte Hebelarme können einfach entfernt werden. Innensechskantschlüssel wird mitgeliefert....
4.10€ *
Dead Eye 7mm Dead Eye 7mm (10pcs) Dead Eye for bracing the shrouds. Technical data Diameter 7 mm Round shape colour light Quantity 10 per packing unit
2.40€ *
Dead Eye 3.5mm Dead Eye 3.5mm (10pcs) Dead Eye for bracing the shrouds. Technical data Diameter 3.5mm Round shape colour dark Quantity 10 per packing unit
2.30€ *
Walnut Dowel 2mm Nussbaum-Rundstab 2 mm Nussbaum-Rundstäbe (Walnut Dowels) Dunkle Rundstäbe für Masten und Rahen. Länge 1 m, VE =1 Stück
Content 1 Meter
1.30€ *
Rundstab Nussbaum 5 mm Nussbaum-Rundstab 5 mm Nussbaum-Rundstäbe (Walnut Dowels) Dunkle Rundstäbe für Masten und Rahen. Länge 1 m, VE =1 Stück
Content 1 Meter
2.10€ *
Rundstab Nussbaum 6 mm Nussbaum-Rundstab 6 mm Nussbaum-Rundstäbe (Walnut Dowels) Dunkle Rundstäbe für Masten und Rahen. Länge 1 m, VE =1 Stück
Content 1 Meter
2.30€ *
Ruderrad Metall brüniert 20 mm Ruderrad Metall brüniert 20 mm Ruderräder aus Metallguss sorgfältig gegossen und brüniert Technische Daten Größe 20 mm Außen-Durchmesser
2.25€ *
Block einfach 5mm Blöcke 5mm (10 Stück) Einfachblock mit einer Bohrung Einfachblöcke werden für die einfache Umlenkung von Leinen und Schoten verwendet und sind in Nussbaum (dunkel) oder Buchsbaum (hell) erhältlich. Technische Daten Länge 5 mm Material Nußbaum (dunkel) Menge 10 Stück pro Verpackungseinheit
2.30€ *
German Fireboat FLB-1 ABS Ship Model Kit 1:25 FLB-1 Remote-controlled model ship fire-fighting boat kit from RoMarin Krick History of the original: The FLB-1 is modelled on a fireboat stationed in Neuss. It was put into service in 1983 and has been in use on the Rhine ever since. The ship is used for fire protection and rescue services. Its relatively compact design, strong...
159.00€ *
Brass Wire 1.0 mm Rod Brass wire 1.0 mm 1m rod Brass wire straight rods to 1 meter length. Ideal as a complement to the railing supports. Good for soft soldering. Brass rods VE =1 piece
Content 1 Meter
1.75€ *
Tanganjicaleisten 0,5x3mm(10Stk) Tanganjicaleisten 0,5x3mm(10Stk) Hellbraunes Holz für helle Beplankungen, ideal für Schiffsdecks Länge 1 m, VE =10 Stück
3.85€ *
Warp Plate PS-150 Polystyrol M 1:24 PS-150 polystyrene warp plate Structural panels made of easy-to-process polystyrene for producing roofs, walls and floors that are absolutely true to the original. Ideal for ship decks, steps and stairs. The material is easy to cut out with scissors. Please make sure to use an adhesive that is suitable for polystyrene! Supplied in...
Content 0.12 Quadratmeter
21.00€ *
3-Blade 40mm L M4 Propeller Dynamic 3-blade propeller made of glass-fibre reinforced plastic. Technical data Number of blades 3 Diameter 40 mm M4 thread Direction of rotation: left Pitch 34 mm
2.95€ *
3-Blade 35mm L M4 Propeller Dynamic 3-blade propeller made of glass-fibre reinforced plastic. Technical data Number of blades 3 Diameter 35 mm M4 thread Direction of rotation: left Pitch 30 mm
2.95€ *
Lifebelt 35x35mm Lifebuoy 35x35 mm (4) Lifebuoys type 2 made of plastic. Enamel or acrylic paints are suitable for painting. VE = 4 lifebuoys Ring diameter 30 mm Outer dimensions 35 x 35 mm Inner dimensions 17 x 17 mm Thickness 2.5 mm Scale 1:25 to 1:35
3.30€ *
Railing supports 6 mm (10 pieces) Railing supports 6 mm (10 pieces) Balustrade supports turned from walnut wood. Height 6 mm Diameter approx. 3 mm Content of the packaging unit 10 pieces Available in the sizes Item no. |60781| 6 mm high PU 10 pieces |60782| 8 mm high PU 10 pieces |60790| 10 mm high PU 10 pieces |60791| 12 mm high PU 10 pieces |60792| 14 mm high PU 10...
2.15€ *
Railing supports 10 mm (10 pieces) Railing supports 10mm (10 pieces) Balustrade supports turned from walnut wood. Height 10 mm Diameter approx. 3.5 mm Content of the packaging unit 10 pieces Available in the sizes Article no. |60781| 6 mm high PU 10 pieces |60782| 8 mm high PU 10 pieces |60790| 10 mm high PU 10 pieces |60791| 12 mm high PU 10 pieces |60792| 14 mm high...
2.15€ *
Railing supports 14 mm (10 pieces) Handrail supports 14mm (10 pieces) Balustrade supports turned from walnut wood. Height 14 mm Diameter approx. 4.3 mm Content of the packaging unit 10 pieces Available in the sizes Article no. |60781| 6 mm high PU 10 pieces |60782| 8 mm high PU 10 pieces |60790| 10 mm high PU 10 pieces |60791| 12 mm high PU 10 pieces |60792| 14 mm high...
2.15€ *
Railing supports 14 mm (10 pieces) Railing supports 16mm (10 pieces) Railing supports Railing supports made of walnut wood. Available in the sizes Item no. |60781| 6 mm high PU 10 pieces |60782| 8 mm high PU 10 pieces |60790| 10 mm high PU 10 pieces |60791| 12 mm high PU 10 pieces |60792| 14 mm high PU 10 pieces |60800| 16 mm high PU 10 pieces
2.15€ *
Rudder Hinges Rudder hinges 2 sets of rudder hinges, suitable for rudder thicknesses up to 5 mm, burnished brass. Total length approx. 32 mm Height approx. 10 mm
4.45€ *
Hall anchor type 2 50 mm metal Hall anchor type 2 50 mm metal Hall anchor for modern work boats. Metal, black burnished Technical data Length 50 mm Width 31 mm Weight approx. 17g Black burnished
4.30€ *
Viewed