What would ship model making be without accessories? Stand-alone models receive the necessary optical finishing touches with the appropriate accessories. Functional models become a finished model ship through model construction accessories like ship propeller, speed controller and ship shaft system. In our jojo model making shop we offer you a wide selection of ship model making accessories from different manufacturers. From the model ship engine and portholes to the model ship's crew, you will find everything that the tinkerer's heart desires.

Model building ship engine & propulsion

Whenever a model ship starts to move, his work begins : the model ship propulsion. This is one of the most important parts of functional models of ship model making accessories. As with real ships, there is also a wide variety of drive sets for ships in the area of model construction. Especially common are rigid drive shafts, which are driven by a model ship engine and which set ship's propellers in motion. The steering is done by a rudder blade which is adjusted to the propeller and guides the water flow in a certain direction.

Boats move faster or slower depending on the condition of the propellers on the ship's shaft systems. Two-blade propellers as ship model construction accessories are particularly suitable for racing boats, four-blade propellers for working ships. Three-bladed propellers are common. For the silent running of submarines we carry special propellers. Large ships can also be propelled with more than one model ship drive in parallel or one behind the other.

Ship propellers & ship propellers as model making accessories for ships

In our online shop for model ships we offer a wide range of brass propellers and ship's propellers from Raboesch. Our ship propellers range from the 2-blade to the 7-blade submarine propeller. In addition, we also offer CNC manufactured racing screws made of aluminium and stainless steel.

The model ship controller

For the engine control of model ships a model ship controller is necessary. This enables the remote control of the engine speed. In the past, mechanical speed controllers were used, which permanently emitted electricity. Today, the electronic controller, which only emits current pulses and thus offers a longer battery life, has become generally accepted. In our shop you will find controllers for DC motors with brush systems and brushless controllers for brushless DC motors.

« show less
What would ship model making be without accessories? Stand-alone models receive the necessary optical finishing touches with the appropriate accessories. Functional models become a finished model ship through model construction accessories  like ship propeller, speed controller and ship shaft system . In our jojo model making shop we offer you a wide selection of ship model making... read more »
Close window

What would ship model making be without accessories? Stand-alone models receive the necessary optical finishing touches with the appropriate accessories. Functional models become a finished model ship through model construction accessories like ship propeller, speed controller and ship shaft system. In our jojo model making shop we offer you a wide selection of ship model making accessories from different manufacturers. From the model ship engine and portholes to the model ship's crew, you will find everything that the tinkerer's heart desires.

Model building ship engine & propulsion

Whenever a model ship starts to move, his work begins : the model ship propulsion. This is one of the most important parts of functional models of ship model making accessories. As with real ships, there is also a wide variety of drive sets for ships in the area of model construction. Especially common are rigid drive shafts, which are driven by a model ship engine and which set ship's propellers in motion. The steering is done by a rudder blade which is adjusted to the propeller and guides the water flow in a certain direction.

Boats move faster or slower depending on the condition of the propellers on the ship's shaft systems. Two-blade propellers as ship model construction accessories are particularly suitable for racing boats, four-blade propellers for working ships. Three-bladed propellers are common. For the silent running of submarines we carry special propellers. Large ships can also be propelled with more than one model ship drive in parallel or one behind the other.

Ship propellers & ship propellers as model making accessories for ships

In our online shop for model ships we offer a wide range of brass propellers and ship's propellers from Raboesch. Our ship propellers range from the 2-blade to the 7-blade submarine propeller. In addition, we also offer CNC manufactured racing screws made of aluminium and stainless steel.

The model ship controller

For the engine control of model ships a model ship controller is necessary. This enables the remote control of the engine speed. In the past, mechanical speed controllers were used, which permanently emitted electricity. Today, the electronic controller, which only emits current pulses and thus offers a longer battery life, has become generally accepted. In our shop you will find controllers for DC motors with brush systems and brushless controllers for brushless DC motors.

3 From 45
No results were found for the filter!
navy Gelenkkupplung Stahl 4/5
navy Gelenkkupplung Stahl 4/5
Gelenkkupplung Stahl 9xL23mm, Bohrung 4/5
4.90€ *
Blue RM-400 6V Electric Motor
Blue RM-400 6V Electric Motor
Electric motor Blue RM-400 6V Small brushed motor with sufficient torque for drives by small diameter marine propellers. Technical data: Rated voltage: 6V Voltage range: 3-6V Shaft diameter: 2.3 mm Weight: 72 g No-load current: 0.80 A...
8.90€ *
Blue RM-410 7.2V Electric Motor
Blue RM-410 7.2V Electric Motor
Electric motor Blue RM-410 7.2V Electric motor with brush from Raboesch in the 400 size. Technical data Rated voltage 7.2V DC Voltage range 6-9V DC Shaft diameter 2.3 mm Free shaft length 13 mm Weight 72 g Max. Efficiency 48.9% Power at...
8.90€ *
Hochlastkupplung 5/4 und 4/3.2
Hochlastkupplung 5/4 und 4/3.2
Drehelastische Wellenkupplung aus dem Maschinenbau. Konstruiert für sehr hohe Drehmomentübertragung und den Ausgleich von geringen Winkelverlagerungen zwischen den Wellen . Das elastische Mittelteil dämpft Drehmomentspitzen. Die...
19.95€ *
Motor Mount 500-800 Alu
Motor Mount 500-800 Alu
stabiler Motorträger für Elektromotoren mit der Baugrößen 500 - 800 sowie andere Typen. Technische Daten Abmessungen (LxBxH): 49.5x55x46 mm Materialstärke: 3 mm Lochabstände: 25, 29 und 31 mm
9.90€ *
Beschlagsatz Comtesse
Beschlagsatz Comtesse
Comtesse Beschlagsatz Der Beschlagsatz enthält die vielen sichtbaren Beschlagteile, wie Lampen, Steuerrad und Teile für die Steuersäule, Winschen, Relingstützen und vieles mehr.
44.00€ *
MAX GEAR geared motor 2.5:1
MAX GEAR geared motor 2.5:1
MAX GEAR geared motor MAX GEAR geared motors are characterised by their quiet running and low power consumption. Universally applicable for many applications. Whether as a marine drive or as a low-speed motor for special functions - MAX...
31.00€ *
Metal Whindshield Riva 1:10
Metal Whindshield Riva 1:10
Windscreen sports boat Windscreen frame made of metal (no stamped part) polished to a shine with clear plastic windscreen. The headlight is already mounted - not illuminable. suitable for many Riva models in scale 1:10 and other mahogany...
49.90€ *
Chrom Rub Rail
Chrom Rub Rail
Chrome-plated rub rail, ideal for Riva or Chris Craft models. semicircular profile, perforated at non-regular intervals of 35-45mm ! Due to technical reasons the holes are not always in the middle. The chrome bar is delivered loosely...
From 12.90€ *
Segelsatz Wasa
Segelsatz Wasa
Segelsatz Wasa Fertig genähter Segelsatz für den Bausatz der Wasa im Maßstab 1:75 Artikelnr. |21961| von COREL Die fertigen Segelsätze sind sorgfältig vorgenäht und am Rand eingefasst. An den Ecken sind sie mit längeren Leinenstücken zur...
69.00€ *
Bullaugen mit Flansch 14mm
Bullaugen mit Flansch 14mm
Bullaugen mit Flansch 14 mm Hochwertige Bullaugen aus gedrehtem Messing und gebohrten Nietlöchern und Glas. Lieferumfang: Packung mit 10 Stück Technische Daten Außen-Durchmesser 14 mm Innen-Durchmesser 10 mm
10.90€ *
Dual motor speed controller QuicRun 860 60A
Dual motor speed controller QuicRun 860 60A
Hobbywing QuicRun WP 880 Dual Brushed ESC 80A The successor to the legendary QuicRun WP860. Now with more power and more setting options via the optional programming box. Electronic speed controller for stepless speed adjustment of...
42.40€ *
Messing Block 12mm
Messing Block 12mm
Messingblock 12 mm (VE2) Block aus Messing mit beweglicher Rolle. Die Rolle hat einen Durchmesser von 12 mm. Am oberen Ende der Messingblöcke befindet sich eine Schlaufe zur Befestigung. In der Packung sind 2 fertig montierte...
6.60€ *
Carbon-Hydropropeller K-Serie 3Bl. 33mm R M4
Carbon-Hydropropeller K-Serie 3Bl. 33mm R M4
Carbon Hydropropeller “K-Serie” aus kohlefaserverstärktem Polyamid mit metrischem Gewindeeinsatz M4 und mit 3 Flügeln. Steigung ca. 1,4 x Schrauben-Ø. Laufrichtung vom Motor aus gesehen.
5.10€ *
Carbon-Hydropropeller K-Serie 3Bl. 36mm R M4
Carbon-Hydropropeller K-Serie 3Bl. 36mm R M4
Carbon Hydropropeller “K-Serie” aus kohlefaserverstärktem Polyamid mit metrischem Gewindeeinsatz M4 und mit 3 Flügeln. Steigung ca. 1,4 x Schrauben-Ø. Laufrichtung vom Motor aus gesehen.
5.10€ *
Bootständer für Riva Modelle
Bootständer für Riva Modelle
Modellständer für diverse Riva Modelle Bausatz aus Holz, unbehandelt ! Abmessungen 600x200x20
36.00€ *
Grundplatte 400x120x20mm
Grundplatte 400x120x20mm
Grundplatte 400x120x20 mm dunkles Vollholz Diese Grundplatten geben Ihrem Schiffsmodell erst die richtige maritime, edle Aufwertung. Derartige Platten mit der sauber gefrästen Zierkante sollten nicht zu groß gewählt werden, damit sie Ihr...
29.60€ *
Stuffing Box 130mm M4
Stuffing Box 130mm M4
Ship shaft system 130mm M4 Low cost steel marine shaft with stern tube made of measurement. Plain bearing. Supplied complete with adjusting ring and lock nut. Technical data Thread ship's propeller M 4 stern tube diameter 6 mm Stern...
7.70€ *
Anker mit Querbalken 30 mm
Anker mit Querbalken 30 mm
Anker mit Querbalken 30 mm Lieferumfang 2 Stück !
5.00€ *
Ankerkette 1 mm
Ankerkette 1 mm
Ankerkette aus Messing Breite 1mm Länge ca. 1m
5.00€ *
Ankerkette 1,5 mm
Ankerkette 1,5 mm
Ankerkette aus Messing Breite 1.5mm Länge ca. 1m
5.00€ *
Augbolzen 15mm
Augbolzen 15mm
Augbolzen 15 mm ca.60 Stück
5.00€ *
Exhibition base 210x105 mm
Exhibition base 210x105 mm
solid wood display stand, allowing you to present your model ship. Raw base, NOT varnished.
14.40€ *
Haken 6mm
Haken 6mm
Haken 6 mm Messing geätzt (VE20) 20 Haken mit Öse mit einer Höhe von 6 mm. Technische Daten Material Messing Höhe 6 mm
2.20€ *
Eye Ring 7mm
Eye Ring 7mm
Augbolzen 7mm Material: Messing Durchmesser Öse: 2.5mm Innendurchmesser: ca. 1.5mm Packungsinhalt: ca. 60 Stück
From 3.50€ *
Figures Set King of Mississippi
Figures Set King of Mississippi
Set of 8 metal figures suitable for Artesania King of Mississippi. Figures made of cast metal - must be assembled and painted. - 14 crew and passengers - 4 animals (horses and cows) Scale 1:80
24.90€ *
Sound Module USM-RC-3
Sound Module USM-RC-3
Sound Module USM-RC-3 Probably the best and most versatile sound module on the market. The module was developed especially for RC model building, in order to equip driving models with true to original and speed-dependent sounds and in...
189.00€ *
Positionslampen 30mm Bausatz
Positionslampen 30mm Bausatz
Positionslampen mit Board Bausatz mit diesem Bausatz lassen sich je eine linke und rechte Positionslampe bauen. Geliefert werden 2 klare Lampenkörper die dann mit einem Lampenboard ausgestattet werden können. Die Metallteile bestehen aus...
6.70€ *
Positionslampen mit Board 25mm
Positionslampen mit Board 25mm
Positionslampen mit Board Messing, vernickelt. Mit 3V Leuchtmittel rot und grün. Der Austausch der Glühbirnchen durch farbige 3mm LED erscheint sinnvoll. Lieferumfang 1 Paar Technische Daten: Länge 25mm Höhe 9mm Betriebsspannung 3 V
11.40€ *
Single Block 4mm
Single Block 4mm
Block single 4mm made of wood approx. 20 pieces
3.80€ *
Ruderrad Metall brüniert 30 mm
Ruderrad Metall brüniert 30 mm
Ruderrad Metall brüniert 30 mm Ruderräder aus Metallguss sorgfältig gegossen und brüniert Technische Daten Größe 30 mm Außen-Durchmesser
2.25€ *
Model supports 26 mm
Model supports 26 mm
Model supports 26 mm made of brass (2 pcs.) Brass model supports. The model can be inserted with the keel into the slot (4mm) of the supports.
9.90€ *
Slack pusher for model sailboats
Slack pusher for model sailboats
Slack pusher for model sailboats Comtesse propulsion set Optional propulsion set for sailing yachts The propulsion set provides propulsion in case the wind drops. The set includes an adjustable motor mount, a small brushed motor with...
38.50€ *
Brass Rings 3mm
Brass Rings 3mm
Brass rings 3mm (approx. 100) Brass rings Rings made of brass wire can be used for various purposes. For example to fix the sail sets for historical ship models.
2.95€ *
Set Collar 4mm
Set Collar 4mm
Set collar 4 mm inside diameter Package contents: 5 Set collar with set screws and Allen key Technical data Inner diameter 4.1 mm Outer diameter 8 mm Width 4.5 mm
3.20€ *
Set Collar 5mm
Set Collar 5mm
Set collar 5mm inside diameter Package contents: 5 Set collar with set screws and Allen key Technical data Inner diameter 5.1 mm Outer diameter 10 mm Width 5 mm
3.50€ *
3 From 45
Viewed