No results were found for the filter!
Positionslampen mit Board 21mm Positionslampen mit Board Messing, vernickelt. Mit 3V Leuchtmittel rot und grün. Der Austausch der Glühbirnchen durch farbige 3mm LED erscheint sinnvoll. Lieferumfang 1 Paar Technische Daten: Länge 21mm Höhe 8mm Betriebsspannung 3 V
11.10€ *
Positionslampen mit Board 25mm Positionslampen mit Board Messing, vernickelt. Mit 3V Leuchtmittel rot und grün. Der Austausch der Glühbirnchen durch farbige 3mm LED erscheint sinnvoll. Lieferumfang 1 Paar Technische Daten: Länge 25mm Höhe 9mm Betriebsspannung 3 V
11.40€ *
Positionslampen mit Board 32mm Positionslampen mit Board Messing, vernickelt. Mit 3V Leuchtmittel rot und grün. Der Austausch der Glühbirnchen durch farbige 4mm LED erscheint sinnvoll. Lieferumfang 1 Paar Technische Daten: Länge 32mm Höhe 11mm Betriebsspannung 6 V
13.70€ *
Positionslampen mit Board 36mm Positionslampen mit Board Messing, vernickelt. Mit 3V Leuchtmittel rot und grün. Der Austausch der Glühbirnchen durch farbige 4mm LED erscheint sinnvoll. Lieferumfang 1 Paar Technische Daten: Länge 36mm Höhe 14mm Betriebsspannung 6 V
14.20€ *
Suchscheinwerfer 14mm 1 Paar Scheinwerfer aus Kunststoff mit 3V Leuchtmittel Die klare Linse kann gegen die Abdeckung ausgetauscht werden. Wir empfehlen den Austausch der mitgelieferten Birnchen gegen passende LED mit max. 4mm Durchmesser. Höhe: ca.14mm
10.30€ *
Suchscheinwerfer 17mm Scheinwerfer aus Metall mit 3V Leuchtmittel. Wir empfehlen den Austausch der mitgelieferten Birnchen gegen passende LED mit max. 4mm Durchmesser. Höhe: ca.17mm Durchmesser: 10mm
12.80€ *
Suchscheinwerfer 17mm Suchscheinwerfer aus Metall, verchromt mit 3V Glühbirne. Soll die Glühbirne gegen eine LED ersetzt werden muss ein geeignete Scheibe mit gefertigt werden ! Höhe: ca.17mm Durchmesser: 12mm
12.80€ *
LED controller box Killerbody LED controller box LED control box in a new design. The LED connections are now made at the front with small micro connectors, allowing the box to be installed in the vehicle in a space-saving manner. A total of 8 connections...
9.80€ *
High Power LED Headlight High Power LED Headlight Ultra bright LED headlight pair with electronic switch, pre-wired. Can be connected AND switched immediately to a free channel of the remote control. An additional switch module is not necessary. Technical data:...
17.90€ *
Clear position lamps Clear position lamps 2 turned brass position lights for installation in a corner with a 90 degree angle Illumination is provided by warm white LEDs. Series resistors for all common on-board voltages are supplied. Technical data: Height:...
9.50€ *
Sidelights r/g Sidelights Position lights r/g One piece each of red (port) and green (starboard) sidelights made of turned brass for installation in a corner or lamp board. The lighting is provided by 3V bulbs. It is advisable to replace the bulbs with...
9.50€ *
Top Light 5.5x9mm Top light - Stern light - Mast lantern The top light or steamer light is a white light shining forwards. It must be visible above the longitudinal axis of the vessel over a horizon arc of 225°, 112.5° to each side. As the top light is...
7.80€ *
Position Lights 5.5x9mm Position lights - sidelights red/green The sidelights indicate the two sides of the ship: a red sidelight to port and a green sidelight to starboard, which must be visible 112.5° to each side. 2 Brass lamp bodies with red/green 3V bulbs...
7.80€ *
Position Lights 7.5x12mm Position lights - sidelights red/green The sidelights indicate the two sides of the ship: a red sidelight to port and a green sidelight to starboard, which must be visible 112.5° to each side. 2 Brass lamp bodies with red/green 3V bulbs...
8.40€ *
Top Light 10x11mm Top light - Stern light - Mast lantern The top light or steamer light is a white light shining forwards. It must be visible above the longitudinal axis of the vessel over a horizon arc of 225°, 112.5° to each side. As the top light is...
9.20€ *
LED light system LED light system Ready-to-connect complete set for retrofitting lighting to R/C vehicles. The set consists of a distribution box with 12 connections and 12 pre-wired LEDs in different colors and sizes. Flashing functions can be activated...
23.95€ *
Standard LED light system Standard LED light system Ready-to-connect complete set for retrofitting lighting to R/C vehicles. The set consists of a distributor box with 5 connections and 8 pre-wired LEDs in different colours and functions. Power is supplied via a...
19.90€ *
Top Light 10x12 Top light - Stern light - Mast lantern The top light or steamer light is a white light shining forwards. It must be visible above the longitudinal axis of the vessel over a horizon arc of 225°, 112.5° to each side. As the top light is...
7.60€ *
Anchor Light 8x50mm Anchor light 8 × 50 mm – dummy (not illuminated) The anchor light 8 × 50 mm is a non-illuminated dummy for visual enhancement in ship model building and scale models . Ideal as a detailed attachment for masts, superstructures or deck...
7.25€ *
Searchlight 14 mm Searchlight D14 Finely detailed plastic searchlight. Kit consisting of housing, bracket, reflector and acrylic glass disc. The lighting is provided by LEDs incl. resistors for 3-14V operating voltage. The plastic parts can be painted and...
5.50€ *
Voltage Regulator SR Modul 1-17V SR module – Flexible voltage regulation for precise applications The SR module is a compact, powerful voltage reduction module that reliably regulates a variable input voltage of 4.5 to 28 volts down to a freely adjustable output voltage...
4.90€ *
NEW
Conical lantern, 30 mm Conical lantern, 30 mm Ship's lantern with bracket. The frame and bracket are made of metal. Not illuminated. Technical specifications Max. diameter approx. 15 mm Lantern height approx. 30 mm Total height approx. 50 mm Total width...
17.20€ *
NEW
Cylindrical lantern, 30 mm Cylindrical lantern, 30 mm Ship's lantern with bracket. The frame and bracket are made of metal. Not illuminated. Technical data Max. diameter approx. 15 mm Lamp height approx. 30 mm Total height approx. 50 mm Total width approx. 36...
17.20€ *
NEW
Cylindrical lantern, 30 mm Cylindrical lantern, 30 mm Replicas of historical lanterns Available in two sizes and two shapes. The lanterns are fully assembled. The insert is made of transparent red plastic and the frame is made of metal with a gold-coloured...
13.35€ *
NEW
Cylindrical lantern, 30 mm Cylindrical lantern, 30 mm Replicas of historical lanterns Available in two sizes and two shapes. The lanterns are fully assembled. The insert is made of transparent red plastic and the frame is made of metal with a gold-coloured...
13.35€ *
NEW
Position lights with board 22mm Position lights with board. Wood and metal kit. Not suitable for lighting Contents: 1 pair Technical specifications: Length 22 mm Height 6 mm
3.50€ *
Work light 15 mm This plastic worklight is supplied with a glass lens and an LED including resistors for an operating voltage of 3-14V. The plastic parts can be easily painted and fixed with a drop of superglue. Width approx. 15 mm. Quantity = 2 pieces.
5.90€ *
Viewed