No results were found for the filter!
Ersatzwelle Edelstahl 5x350 +M4 Edelstahl Schiffswelle Durchmesser 5mm Länge 350mm Gewinde M4
6.00€ *
LED controller box Killerbody LED controller box LED control box in a new design. The LED connections are now made at the front with small micro connectors, allowing the box to be installed in the vehicle in a space-saving manner. A total of 8 connections...
9.80€ *
Ball Bearing House 4mm Bearing house with ball bearing for stern tubes with 4mm diameter and 2mm shafts. Suitable for do-it-yourself construction or tuning of shaft systems. Is plugged onto the end of the shaft tube and glued on. Supplied with a brass bearing...
9.00€ *
Lagerköcher 8mm mit Kugellager Lagerköcher mit Kugellager für Stevenrohre mit 8mm Durchmesser und 4mm Wellen. Geeignet für den Selbstbau oder Tuning von Wellenanlagen. Wird auf das Ende des Wellenrohres gesteckt und angeklebt. geliefert wird ein Messing Lagerköcher, 2...
13.00€ *
PTFE Drucklager 3mm Teflon PTFE Druckscheibe für 3mm Wellen Innendurchmesser 3mm Außendurchmesser 5.5mm Lieferumfang 2 Stück
1.60€ *
Brass Rings 6mm Brass rings 6mm (approx. 60) Rings made of brass wire can be used for various purposes. For example to fix the sail sets for historical ship models.
2.95€ *
Cannon Wheels 6.5x2.5mm Cannon wheels for miniatures and ship models. single wheels made of turned brass . 6,5mm x 2,5mm Scope of delivery 12 pieces
2.95€ *
Turnbuckle M1.2 x 15/20 Turnbuckle M1.2 x 15/20 Turnbuckle or eyebolt ..... made of brass. With left/right thread the length of the shroud turnbuckle changes. Thus shrouds, ropes or cables can be easily tensioned. Scope of delivery 1 piece Technical data Thread...
2.00€ *
Copper pipe soft 3x2mm 1m ring Copper tube soft 3x2mm 1m ring Soft copper tube for individual production of steam pipes or cooling coils. Delivery 1 m rolled Dimensions Outer-Ø 3 mm Inner-Ø 2 mm Length 1000 mm
11.95€ *
magnets 12 x 7 x 2 mm Extremely strong magnets 12 x 7 x 2 mm. Square magnet neodymium, nickel-plated with high temperature resistance and holding force of approx. 1kg. 10 pcs
7.90€ *
Trim Weights Trim weights, lead-free self-adhesive with denomination of 5g Ideal for weighing out and trimming models. With highly adhesive self-adhesive tape for permanent hold. Dimensions approx. 19 x 12 x 3mm per piece Scope of delivery 10 pieces
2.95€ *
Quicrun Fusion SE Brushless Motor/Controler 1200kV Hobbywing Quicrun Fusion SE 1200kV Motor and controller combined in one housing ! This brushless controller and motor combination is already the second improved version of the Quicrun Fusion. The Quicrun Fusion SE is just about the size...
75.90€ *
AKL-8-W Terminal Block The AKL-8-W connection terminal enables convenient connection of LEDs and other consumers to the switching outputs of all common Beier Electronic switching modules. The module is NOT an extension of functions but merely a way of quickly...
18.95€ *
Set Collar 3mm Set collar 3 mm inside diameter Package contents: 5 Set collar with set screws and Allen key Technical data Inner diameter 3.1 mm Outer diameter 8 mm Width 5 mm
3.20€ *
Set Collar 5mm Set collar 5mm inside diameter Package contents: 5 Set collar with set screws and Allen key Technical data Inner diameter 5.1 mm Outer diameter 10 mm Width 5 mm
3.50€ *
Delrin Bearing Bushes 4x5x8mm Delrin bearing bushes for 4mm shafts 2 bearing bushes made of Delrin for the construction of ship shafts. Delrin is characterized by high strength, hardness and rigidity over a wide temperature range. Its high abrasion resistance and low...
7.40€ *
Running Hardware Riva Aquarama V2 brushless A beautiful Riva model necessarily needs a powerful drive. With this set we have put together a drive that is fast but does not go to the limits of what is technically possible. The shafts are mounted on two bearings and are absolutely...
319.95€ *
Boost 60 490KV Brushless Motor Boost 60 Brushless Motor from Pichler Modellbau High quality external rotor brushless motor for large models. The motor is designed with 15 years of experience in model building and the claim to use only high-quality materials....
105.00€ *
Boost 50 610KV Brushless Motor Boost 50 Brushless Motor from Pichler Modellbau High quality external rotor brushless motor for large models. The motor is designed with 15 years of experience in model building and the claim to use only high-quality materials....
97.00€ *
Boost 80 320KV Brushless Motor Boost 50 Brushless Motor from Pichler Modellbau High quality external rotor brushless motor for large models. The motor is designed with 15 years of experience in model building and the claim to use only high-quality materials....
119.00€ *
Model Stand Flying Dutchman Exclusive model stand for the Flying Dutchman ship model by Occre. The kit contains the following parts: - MDF wood - 2 brass tentacles - instructions Dimensions: Length: 300 mm width: 150 mm Height: 95 mm
45.00€ *
Fittings Set Torben Fittings set for the Torben harbour tugboat. Consisting of: -60 mm cast metal tow bar -15 x 40 mm metal anchor winch -30 mm green/red 6 V metal position light, illuminable -8 car tyre fenders, 32 mm -4 metal double bollards -2 metal...
135.00€ *
High Power LED Headlight High Power LED Headlight Ultra bright LED headlight pair with electronic switch, pre-wired. Can be connected AND switched immediately to a free channel of the remote control. An additional switch module is not necessary. Technical data:...
17.90€ *
Grating 55mm Originally, wooden gratings were used to safely cover hatches in the deck of ships, while fresh air and light could pass through. The set consists of 30 pieces of laser cut strips that can be assembled into a cover of maximum 55x55mm....
2.95€ *
Cannon Portholes 8x8mm Piece ports (also gun ports) are closable openings in the side of warships through which cannons placed inside the ship, the pieces, could fire. Reproduction of a piece port for cutouts inner size 8x8mm made of metal movable. Scope of...
2.95€ *
Bluetooth module BTC-1 A small gadget for our sound ride controllers of the SFR series and the sound module USM-RC-3. With the Bluetooth module BTC-1, the functions of the modules can be controlled via Bluetooth using the Android app "SFR-1...
21.95€ *
Wantenspanner M1,2 x 13/18 Wantenspanner M1,2 x 13/18 Wantenspanner, Spannschloß oder Ösenschraube ..... aus Messing. Mit links/rechts Gewinde verändert sich die Länge des Wantenspanners. So können Wanten, Seile, Taue oder Züge einfach gespannt werden....
1.65€ *
Shroud Turnbuckle M2 x 21/31 Shroud turnbuckle M2 x 21/31 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1 piece...
1.65€ *
Shroud Turnbuckle M2.5 x 32/49 Shroud turnbuckle M2.5 x 32/49 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1...
1.70€ *
Sail kit Prins Willem Sail kit Prins Willem Ready made sail set for the Sovereign of the Seas kit. Blocks, rings and rigging twine for rigging the sails are neither included in the kit nor in the sail set and must be purchased separately.
49.00€ *
Sail Set Hunter Mamoli Sail Set Hunter Mamoli Finished sail set for the Hunter 1/72nd scale kit. The finished sail sets are carefully pre-sewn and hemmed at the edges. There are small loops at the corners of the sails for attaching the lines. The sails can be...
31.00€ *
Sail Set America Mamoli Sail Set America Mamoli Finished sail set for the America 1/64nd scale kit. The finished sail sets are carefully pre-sewn and hemmed at the edges. There are small loops at the corners of the sails for attaching the lines. The sails can...
28.50€ *
Sail Set Mary Mamoli Sail Set Mary Mamoli Finished sail set for the Mary 1/54nd scale kit. The finished sail sets are carefully pre-sewn and hemmed at the edges. There are small loops at the corners of the sails for attaching the lines. The sails can be...
21.00€ *
Razer Ten Motor Brushless Motor 3652 4600kV The Razerten is a sensorless high-performance motor with enormous power. The dismountable CNC-milled aluminium housing, the finely balanced rotor with precision ball bearings are top-class equipment details. Features: -4-pole rotor...
39.75€ *
Outboard Engine Evinrude Modern outboard motor for sports boats up to approx. 100 cm in length. Power is transmitted via high-quality metal bevel gears on a 3-blade propeller with a diameter of 42 mm. The outboard motor is supplied without a built-in electric...
145.00€ *
Viewed