Products from Aeronaut
Aeronaut Modellbau
Aeronaut ist ein Modellbauhersteller mit echter Tradition welcher auf schaut über 100 Jahre Firmengeschichte zurück schaut.
Spezialisiert auf Modelle aus den Bereichen AERO (Luft) und NAUT (Wasser) leitet sich auch die Firmenbezeichnung ab.
Seit Anfang der 2000er Jahre fertigt AERONAUT Baukästen bereits mit Laser Technologie und bietet ein breites Sortiment an solchen Baukästen und Zubehör für Modellbauer an.
Aeronaut Schiffsmodellbau
Fischkutter, Segeljolle oder Schlachtschiff in der AERONAUT Flotte ist für jeden Geschmack ein preiswertes Modell zu finden. Segelschiffe mit Fernsteuerung und Einsteiger Bausätze machen einen großen Teil des Sortiments aus.
No results were found for the filter!
Replacement LED Light Set 3-14V LED light set to replace conventional light bulbs The LED lighting set consists of 5 white LEDs and one green and one red LED. Series resistors are included for a voltage range of 3-14V and must be soldered to the LEDs. The light set enables nautical lighting for small ship models with position light (green/red) and up to 5 warm white...
6.90€ *
Brushed Motor 620 navy Special electric motor for a prototypical driving of ship models without gearbox. The motor is a power pack of size 620, 5-pole and very high torque with slow speed. Supplied with interference suppression kit. Dimensions: 36 x 75 mm Idle speed: 3.400 Shaft Ø: 3.17 mm Shaft length: 9.5 mm voltage: 6-12V max. continuous current: approx. 12A
19.80€ *
Schiffslaterne Bausatz 13,5mm Schiffslaterne Bausatz mit diesem Bausatz lassen sich wahlweise Rundumleuchten, Hecklichter oder Topplichter herstellen. Geliefert werden 4 klare Lampenkörper die dann mit Fuß, Deckel oder Reflektoren ausgestattet werden können. Reflektoren, Fuß und Deckel bestehen aus Neusilber. passend für 4-mm-LED oder Glühbirnchen. Technische...
7.40€ *
Brass block 7 mm Brass block 7 mm (VE5) Brass block with movable roller. The roller has a diameter of 7 mm. There is a loop at the top end of the brass blocks for fastening. The pack contains 5 fully assembled roller blocks. Technical data Roller diameter (D) approx. 7 mm Height (H) approx. 13 mm Dimension (A) approx. 10 mm Dimension (B) approx. 3 mm
15.00€ *
Bellissima Sailboat Bellissima is the enlargement of our sailboat Bella. The construction of the two models is identical, but the Bellissima is a larger version of this beautiful sailboat. This model is one beauty made of mahogany. The construction is made of birch and mahogany plywood on a Depron slipway plate. The plywood parts are all laser cut so...
279.00€ *
North Sea Ffishing Boat MÖVE The Möve 2 (Seagull) was modeled after a small North Sea fishing boat, as they go fishing in large numbers on the local coasts. Due to its simple construction, the Seagull is an ideal model for beginners in model building or for the promotion of young talents in the club. The seagull is built entirely from wood. All components are...
79.00€ *
Cabin Cruiser DIVA DIVA cabin cruiser Kit of a model cabin cruiser from the 1960s. The cabin superstructure is removable, allowing easy access to the interior of the model in order to reach the components required for propulsion, such as the motor, battery and servo. The model is built using a frame construction method - a slipway (template) is supplied...
89.00€ *
Transportkisten 33mm offene Transportkisten mit Griffmulde Laser Bausatz aus Holz 3 Kisten ca. 33x23x7,5mm, 3 Kisten ca. 33x23x11,5 mm Maßstab ca. 1:15
5.70€ *
Schaltmodul Easy-Light Easy-Light ist mehr als nur ein Lichtmodul. Mit dem Schaltmodul Easy-Light können bis zu 5 unterschiedliche Funktionen mit einem Kanal der Steuerung geschaltet werden. Der Anschluss der zu steuernden Funktion und der Anschluss an den Empfänger erfolgt direkt auf der Steuerplatine und wird dort aufgelötet. Das Modul wird dann an einem...
29.95€ *
Schiffslaterne Bausatz 8mm Schiffslaterne Bausatz mit diesem Bausatz lassen sich wahlweise Rundumleuchten, Hecklichter oder Topplichter herstellen. Geliefert werden 4 klare Lampenkörper die dann mit Fuß, Deckel oder Reflektoren ausgestattet werden können. Reflektoren, Fuß und Deckel bestehen aus Neusilber. passend für 3-mm-LED oder Glühbirnchen. Technische...
5.70€ *
Positionslampen 30mm Bausatz Positionslampen mit Board Bausatz mit diesem Bausatz lassen sich je eine linke und rechte Positionslampe bauen. Geliefert werden 2 klare Lampenkörper die dann mit einem Lampenboard ausgestattet werden können. Die Metallteile bestehen aus Neusilber. passend für 5-mm-LED oder Glühbirnchen. Technische Daten: Höhe 10mm Länge 30mm
6.70€ *
Outboard Engine Evinrude Modern outboard motor for sports boats up to approx. 100 cm in length. Power is transmitted via high-quality metal bevel gears on a 3-blade propeller with a diameter of 42 mm. The outboard motor is supplied without a built-in electric motor. The bevel gears must always be well greased, a grease nipple is already installed on the...
149.00€ *
Outboard Engine Seven A modern outboard motor made of plastic for electric motors from approx. 700-1000 watts. It is driven by a flexible shaft in a Teflon tube. The housing is made of white ABS and can be painted as required. The three individual plastic covers are glued to the housing cover after painting. They are mounted on the transom of the boat with...
69.90€ *
Brass block 8 mm Brass block 8 mm (VE5) Brass block with movable roller. The roller has a diameter of 8 mm. There is a loop at the top end of the brass blocks for fastening. The pack contains 5 fully assembled roller blocks. Technical data Roller diameter (D) approx. 8 mm Height (H) approx. 16 mm Dimension (A) approx. 12 mm Dimension (B) approx. 4.5 mm
16.00€ *
Brass block 3 mm Brass block 3 mm (VE5) Brass block with movable roller. The roller has a diameter of 3 mm. There is a loop at the top end of the brass blocks for fastening. The pack contains 5 fully assembled roller blocks. Technical data Roller diameter (D) approx. 3 mm Height (H) approx. 8.5 mm Dimension (A) approx. 5 mm Dimension (B) approx. 3 mm
14.20€ *
Marine accessories catalogue Aeronaut Thousands of fitting parts, accessories, drives, electronics and much more for functional models, sailing boats or stand models. 79 pages filled to the brim with cleats, railing supports, anchors, ship lighting and attachments of all kinds. Also includes shafts and screws from the Raboesch programme.
5.00€ *
Double block 11 mm Double block 11 mm Brass block with movable roller. The roller has a diameter of 3 mm. There is a loop for fastening at the top end of the brass blocks. Technical data Roller diameter (D) approx. 3 mm Height (H) approx. 11 mm Dimension (A) approx. 8 mm Dimension (B) approx. 5.5 mm Scope of delivery: 3 pieces
17.50€ *
Double block 14 mm Double block 14 mm Brass block with movable roller. The roller has a diameter of 5 mm. There is a loop for fastening at the top end of the brass blocks. Technical data Roller diameter (D) approx. 5 mm Height (H) approx. 14 mm Dimension (A) approx. 10 mm Dimension (B) approx. 5.5 mm Scope of delivery: 3 pieces
17.50€ *
Clear position lamps Clear position lamps 2 turned brass position lights for installation in a corner with a 90 degree angle Illumination is provided by warm white LEDs. Series resistors for all common on-board voltages are supplied. Technical data: Height: 10mm Diameter: 6mm
9.50€ *
Position Lights 5.5x9mm Position lights - sidelights red/green The sidelights indicate the two sides of the ship: a red sidelight to port and a green sidelight to starboard, which must be visible 112.5° to each side. 2 Brass lamp bodies with red/green 3V bulbs We recommend the use of LEDs instead of bulbs - with white light, the lamp bodies can also be used...
7.80€ *
Top Light 7.5x12mm Top light - Stern light - Mast lantern The top light or steamer light is a white light shining forwards. It must be visible above the longitudinal axis of the vessel over a horizon arc of 225°, 112.5° to each side. As the top light is only shown by ships travelling under engine, it is also known as the steamer light. The stern light is...
8.40€ *
Top Light 10x15mm Top light - Stern light - Mast lantern The top light or steamer light is a white light shining forwards. It must be visible above the longitudinal axis of the vessel over a horizon arc of 225°, 112.5° to each side. As the top light is only shown by ships travelling under engine, it is also known as the steamer light. The stern light is...
9.30€ *
Top Light 10x11mm Top light - Stern light - Mast lantern The top light or steamer light is a white light shining forwards. It must be visible above the longitudinal axis of the vessel over a horizon arc of 225°, 112.5° to each side. As the top light is only shown by ships travelling under engine, it is also known as the steamer light. The stern light is...
9.20€ *
Cleat 18mm Cleat metal 18mm Cleat made of cast metal, nickel-plated. Scope of delivery: 2 pieces Technical data: 18x5.5x8 mm
3.10€ *
Top Light 10x12 Top light - Stern light - Mast lantern The top light or steamer light is a white light shining forwards. It must be visible above the longitudinal axis of the vessel over a horizon arc of 225°, 112.5° to each side. As the top light is only shown by ships travelling under engine, it is also known as the steamer light. The stern light is...
7.60€ *
Position Lights 10x12mm Position lights - sidelights red/green The sidelights indicate the two sides of the ship: a red sidelight to port and a green sidelight to starboard, which must be visible 112.5° to each side. 2 Brass lamp bodies with red/green 3V bulbs We recommend the use of LEDs instead of bulbs - with white light, the lamp bodies can also be used...
7.60€ *
sailboat Clipper The sailboat Clipper is ideally suited for the beginning of model shipbuilding. The young modeler learns with this model the frame construction method and the basic knowledge of model sailing. This kit is so well prepared that no tools are required for construction, the wooden parts are all punched out and the aluminum tubes for the...
45.00€ *
Sailboat Lili The sailboat Lili is built on a thermoformed plastic hull with precisely cut laser parts made of wood (mahogany, birch). The kit is also aimed at beginners in the sailboat scene. However, some basic knowledge in handling different materials and tools should be present. The precision-fit parts make for easy assembly. The cockpit is...
99.00€ *
Bella Sailboat Bella is our dream boat with lots of real mahogany wood. The boat is built in the proven buckling-span construction method on a slipway plate made of Depron, which was introduced by aero-naut with the boat Classic. The construction is kept so simple that the model can be built successfully even by novice builders. By removing the roof,...
199.00€ *
Hansa Dinghy The Hansa dinghy was introduced in 1947 by Henry Rasmussen, founder of the renowned boat and yacht yard Abeking & Rasmussen (A&R) in Lemwerder near Bremen, based on an initial design from 1920. At that time, Henry Rasmussen built a small dinghy called VISKA for two Copenhagen friends, which was used to make longer voyages single-handed...
249.00€ *
Harbor Tug Jonny Harbor tug Jonny The kit impresses with very high quality materials and rewards with a perfect result. The voluminous hull is made of GRP, all positions for hull openings are molded on. The model is delivered with 2 shaft drives and 2 rudders, a cort nozzle can be retrofitted. Propulsion is also possible with bulkhead drive, for the...
479.00€ *
Harbor Tugboat Torben Torben is a prototypical replica of a harbor tugboat and contains all the essential features of the original. Ready built, this model impresses every modeling enthusiast because of its numerous and detailed individual parts. The spacious hull offers enough space for remote control, propulsion and special functions. Fittings kit 303101...
135.00€ *
MS Greundiek Coaster MS Greundiek coaster kit The Greundiek was laid down in 1949 as "Hermann-Hans" at the Rickmers shipyard in Bremerhaven; the launch was in January 1950. The ship was one of the first ships built in Germany after World War II and one of the first ever civilian ships of all-welded construction. In 1965, the...
310.00€ *
Viewed