Your model ship stands majestically in its place, but you want to turn it into an eye-catcher with the right gadgets? Everything for steering, lighting, arming, fenders and much more you will find in the category Fittings in our online store for model ships.


Fittings for model ships: portholes and railing supports

Fittings range from portholes, railing and handrail supports, maidens to piece ports and cleats. In the hardware parts category, you'll find all the replacement parts and components a model ship builder could possibly need. Among our top sellers are portholes and railing supports. Our portholes are available with rivets and made of glass, portholes with flange or made of turned brass. The high-quality portholes are available in different diameters, so that they fit perfectly into your ship model. The same applies to the railing supports, which have different lengths and are offered in different drafts in the model store. So that you can also find the right railing handrail for your historical ship model and the respective era.

Ship components for model ships: Anchors and cannons

In our model shop assortment you will find the anchor that fits your model ship. In our selection you will find anchors with crossbars, Spanish anchors or Hall anchors. In addition, we also offer anchor chains in different widths. Certain model ships are also often equipped with cannons to give the ship model a very authentic look. In addition to complete cannons and entire cannon yawls and boats, we also offer simple cannon barrels.

More choice of fittings and components

Whether fans for the cabins or rigging twine and rigging hooks, we also offer some fenders (side and bow fenders, tire fenders, ball fenders), sheet lines or accessory sets for lamp housings. Your ship model can be skilfully equipped with cargo such as transport boxes or barrels and set in a realistic scene with bollards. There is also a lot more to discover in terms of components. Whether you are looking for shroud turnbuckles, eyebolts, rudder wheels, large bow cleats or throttle levers - we recommend that you use our search bar at the top of the website. With this function, you can easily and quickly find the right hardware sets for your particular ship model and the corresponding historical flair.

« show less
Your model ship stands majestically in its place, but you want to turn it into an eye-catcher with the right gadgets? Everything for steering, lighting, arming, fenders and much more you will find in the category Fittings in our online store for model ships. Fittings for model ships: portholes and railing supports Fittings range from portholes, railing and handrail supports, maidens to... read more »
Close window

Your model ship stands majestically in its place, but you want to turn it into an eye-catcher with the right gadgets? Everything for steering, lighting, arming, fenders and much more you will find in the category Fittings in our online store for model ships.


Fittings for model ships: portholes and railing supports

Fittings range from portholes, railing and handrail supports, maidens to piece ports and cleats. In the hardware parts category, you'll find all the replacement parts and components a model ship builder could possibly need. Among our top sellers are portholes and railing supports. Our portholes are available with rivets and made of glass, portholes with flange or made of turned brass. The high-quality portholes are available in different diameters, so that they fit perfectly into your ship model. The same applies to the railing supports, which have different lengths and are offered in different drafts in the model store. So that you can also find the right railing handrail for your historical ship model and the respective era.

Ship components for model ships: Anchors and cannons

In our model shop assortment you will find the anchor that fits your model ship. In our selection you will find anchors with crossbars, Spanish anchors or Hall anchors. In addition, we also offer anchor chains in different widths. Certain model ships are also often equipped with cannons to give the ship model a very authentic look. In addition to complete cannons and entire cannon yawls and boats, we also offer simple cannon barrels.

More choice of fittings and components

Whether fans for the cabins or rigging twine and rigging hooks, we also offer some fenders (side and bow fenders, tire fenders, ball fenders), sheet lines or accessory sets for lamp housings. Your ship model can be skilfully equipped with cargo such as transport boxes or barrels and set in a realistic scene with bollards. There is also a lot more to discover in terms of components. Whether you are looking for shroud turnbuckles, eyebolts, rudder wheels, large bow cleats or throttle levers - we recommend that you use our search bar at the top of the website. With this function, you can easily and quickly find the right hardware sets for your particular ship model and the corresponding historical flair.

18 From 22
No results were found for the filter!
NEW
Segelsatz CSS Alabama 1:00
Segelsatz CSS Alabama 1:00
Segelsatz für MAMOLI CSS Alabama fertig genäht
50.00€ *
NEW
Segelsatz HMS Victory 1:150
Segelsatz HMS Victory 1:150
Segelsatz für MAMOLI HMS Victory 1:150 , fertig genäht
50.00€ *
NEW
Segelsatz Bark Endeavour 1:100
Segelsatz Bark Endeavour 1:100
Segelsatz für MAMOLI Segelsatz Bark Endeavour 1:100 - fertig genäht
50.00€ *
Handrail complete, 2 sections, 5 mm
Handrail complete, 2 sections, 5 mm
Ready-to-install handrail, nickel-plated with two crossbars. Distance between crossbars approx. 5 mm Distance between supports approx. 8 mm Total length per strip approx. 250 mm
6.70€ *
Handrail complete, 3 sections, 7 mm
Handrail complete, 3 sections, 7 mm
Ready-to-fit handrail, nickel-plated with three crossbars. Distance between crossbars: approx. 7 mm Distance between supports: approx. 12 mm Total length per strip: approx. 250 mm
6.80€ *
Handrail complete, 4 sections, 11 mm
Handrail complete, 4 sections, 11 mm
Ready-to-fit handrail, nickel-plated, with four crossbars. Distance between crossbars: approx. 11 mm Distance between supports: approx. 14 mm Total length per section: approx. 250 mm
6.60€ *
NEW
Signal Horn 23mm
Signal Horn 23mm
Brass signal horn – 23 mm Detailed brass signal horn for model making – ideal as a ship model accessory for realistic maritime equipment. Perfect for model ships , ship models and dioramas (e.g. on the bridge, deckhouse or mast area)....
2.00€ *
Brass pulley, 4 mm
Brass pulley, 4 mm
Turned brass pulley and rope block. Pack of 25. Ø 4 mm, bore 1.6 mm
8.40€ *
Brass pulley, 6 mm
Brass pulley, 6 mm
Turned brass pulley and rope block. Pack of 25. Ø 6 mm, bore 2.0 mm
9.30€ *
Brass pulley, 7 mm
Brass pulley, 7 mm
Turned brass pulley and rope block. Pack of 25. Ø 7 mm, bore 2.0 mm
10.30€ *
Brass pulley, 8 mm
Brass pulley, 8 mm
Turned brass pulley and rope block. Pack of 25. Ø 8 mm, bore 2.0 mm
11.60€ *
Brass pulley, 9 mm
Brass pulley, 9 mm
Turned brass pulley and rope block. Pack of 25. Ø 9 mm, bore 1.5 mm
14.40€ *
Brass pulley, 10 mm
Brass pulley, 10 mm
Turned brass pulley and rope block. Pack of 25. Ø 10 mm, bore 1.5 mm
15.40€ *
Brass pulley, 12 mm
Brass pulley, 12 mm
Turned brass pulley and rope block. Pack of 25. Ø 12 mm, bore 1.5 mm
20.90€ *
Brass pulley, 14 mm
Brass pulley, 14 mm
Turned brass pulley and rope block. Pack of 25. Ø 14 mm, bore 1.5 mm
27.40€ *
Inflatable Dinghy 95 mm kit
Inflatable Dinghy 95 mm kit
aero-naut 95 mm inflatable dinghy – a compact dinghy for model shipbuilding With the aero-naut 95 mm inflatable boat , you can add a striking dinghy with a realistic appearance to your model ship. Its compact shape makes this accessory a...
18.20€ *
Cutter - Dinghy 39mm
Cutter - Dinghy 39mm
aero-naut Cutter 39 mm – compact dinghy for model shipbuilding With the aero-naut Cutter 39 mm , you can add a classic dinghy with a distinctive look to your model ship. Its compact design makes this accessory a perfect addition to model...
5.80€ *
Cutter - Dinghy 65mm
Cutter - Dinghy 65mm
aero-naut Cutter 65 mm – compact dinghy for model shipbuilding With the aero-naut Cutter 65 mm , you can add a classic dinghy with a harmonious appearance to your model ship. Its compact design makes this accessory a perfect addition to...
7.25€ *
Cutter - Dinghy 87mm
Cutter - Dinghy 87mm
aero-naut Cutter 87 mm – a classic dinghy for model shipbuilding With the aero-naut Cutter 87 mm , you can add a classic dinghy with an authentic look to your model ship. The sleek shape and the included 2 oars make this accessory a...
13.70€ *
Cutter - Dinghy 102mm
Cutter - Dinghy 102mm
aero-naut Cutter 102 mm – a classic dinghy for model shipbuilding With the aero-naut Cutter 102 mm , you can add a classic dinghy with an authentic look to your model ship. The sleek shape and the included 2 oars make this accessory a...
17.10€ *
Cutter - Dinghy 123 mm
Cutter - Dinghy 123 mm
aero-naut Cutter 123 mm – a classic dinghy for model shipbuilding With the aero-naut Cutter 123 mm , you can add a classic dinghy with an authentic look to your model ship. The sleek shape and the included 2 oars make this accessory a...
16.00€ *
NEW
Mast Basket Kit 56mm
Mast Basket Kit 56mm
56 mm mast basket kit made from laser-cut pear wood.
6.00€ *
NEW
Mast Basket Kit 80mm
Mast Basket Kit 80mm
80 mm mast basket kit made from laser-cut pear wood.
6.50€ *
NEW
Bollard 5x10 mm (10)
Bollard 5x10 mm (10)
Bollard 5x10 mm, pack of 10
6.15€ *
NEW
Conical lantern, 30 mm
Conical lantern, 30 mm
Conical lantern, 30 mm Ship's lantern with bracket. The frame and bracket are made of metal. Not illuminated. Technical specifications Max. diameter approx. 15 mm Lantern height approx. 30 mm Total height approx. 50 mm Total width...
17.20€ *
NEW
Cylindrical lantern, 30 mm
Cylindrical lantern, 30 mm
Cylindrical lantern, 30 mm Ship's lantern with bracket. The frame and bracket are made of metal. Not illuminated. Technical data Max. diameter approx. 15 mm Lamp height approx. 30 mm Total height approx. 50 mm Total width approx. 36...
17.20€ *
NEW
Mast fitting 12x3 mm (10)
Mast fitting 12x3 mm (10)
Mast fitting 12x3 mm (10)
4.35€ *
NEW
Mast fitting 14x3.5 mm (10)
Mast fitting 14x3.5 mm (10)
Mast fitting 14x3.5 mm (10)
4.35€ *
NEW
Mast fitting 8x2 mm (10)
Mast fitting 8x2 mm (10)
Mast fitting 8x2 mm (10)
4.35€ *
NEW
Mast fitting 16x4 mm (10)
Mast fitting 16x4 mm (10)
Mast fitting 16x4 mm (10)
4.35€ *
NEW
Large ring with 3 eyelets (10)
Large ring with 3 eyelets (10)
Large ring with 3 eyelets (10) Tensioning device with three eyelets Technical specifications Outer diameter approx. 12 mm Inner diameter approx. 7 mm Thickness approx. 4 mm Eyelet diameter approx. 1.2 mm Material: plastic
4.70€ *
Step Ladder 3mm
Step Ladder 3mm
Plastic step ladder, length approx. 100 mm. Pack of 1. Width approx. 3 mm
3.40€ *
Step Ladder 4mm
Step Ladder 4mm
Plastic step ladder, length approx. 100 mm. Pack of 1. Width approx. 4 mm
3.40€ *
Step Ladder 7mm
Step Ladder 7mm
Plastic step ladder, length approx. 100 mm. Pack of 1. Width approx. 7 mm
3.60€ *
Step Ladder 10mm
Step Ladder 10mm
Plastic step ladder, length approx. 100 mm. Pack of 1. Width approx. 10 mm
3.60€ *
Step Ladder 12mm
Step Ladder 12mm
Plastic step ladder, length approx. 100 mm. Pack of 1. Width approx. 12 mm
3.80€ *
18 From 22
Viewed