What would ship model making be without accessories? Stand-alone models receive the necessary optical finishing touches with the appropriate accessories. Functional models become a finished model ship through model construction accessories like ship propeller, speed controller and ship shaft system. In our jojo model making shop we offer you a wide selection of ship model making accessories from different manufacturers. From the model ship engine and portholes to the model ship's crew, you will find everything that the tinkerer's heart desires.

Model building ship engine & propulsion

Whenever a model ship starts to move, his work begins : the model ship propulsion. This is one of the most important parts of functional models of ship model making accessories. As with real ships, there is also a wide variety of drive sets for ships in the area of model construction. Especially common are rigid drive shafts, which are driven by a model ship engine and which set ship's propellers in motion. The steering is done by a rudder blade which is adjusted to the propeller and guides the water flow in a certain direction.

Boats move faster or slower depending on the condition of the propellers on the ship's shaft systems. Two-blade propellers as ship model construction accessories are particularly suitable for racing boats, four-blade propellers for working ships. Three-bladed propellers are common. For the silent running of submarines we carry special propellers. Large ships can also be propelled with more than one model ship drive in parallel or one behind the other.

Ship propellers & ship propellers as model making accessories for ships

In our online shop for model ships we offer a wide range of brass propellers and ship's propellers from Raboesch. Our ship propellers range from the 2-blade to the 7-blade submarine propeller. In addition, we also offer CNC manufactured racing screws made of aluminium and stainless steel.

The model ship controller

For the engine control of model ships a model ship controller is necessary. This enables the remote control of the engine speed. In the past, mechanical speed controllers were used, which permanently emitted electricity. Today, the electronic controller, which only emits current pulses and thus offers a longer battery life, has become generally accepted. In our shop you will find controllers for DC motors with brush systems and brushless controllers for brushless DC motors.

« show less
What would ship model making be without accessories? Stand-alone models receive the necessary optical finishing touches with the appropriate accessories. Functional models become a finished model ship through model construction accessories  like ship propeller, speed controller and ship shaft system . In our jojo model making shop we offer you a wide selection of ship model making... read more »
Close window

What would ship model making be without accessories? Stand-alone models receive the necessary optical finishing touches with the appropriate accessories. Functional models become a finished model ship through model construction accessories like ship propeller, speed controller and ship shaft system. In our jojo model making shop we offer you a wide selection of ship model making accessories from different manufacturers. From the model ship engine and portholes to the model ship's crew, you will find everything that the tinkerer's heart desires.

Model building ship engine & propulsion

Whenever a model ship starts to move, his work begins : the model ship propulsion. This is one of the most important parts of functional models of ship model making accessories. As with real ships, there is also a wide variety of drive sets for ships in the area of model construction. Especially common are rigid drive shafts, which are driven by a model ship engine and which set ship's propellers in motion. The steering is done by a rudder blade which is adjusted to the propeller and guides the water flow in a certain direction.

Boats move faster or slower depending on the condition of the propellers on the ship's shaft systems. Two-blade propellers as ship model construction accessories are particularly suitable for racing boats, four-blade propellers for working ships. Three-bladed propellers are common. For the silent running of submarines we carry special propellers. Large ships can also be propelled with more than one model ship drive in parallel or one behind the other.

Ship propellers & ship propellers as model making accessories for ships

In our online shop for model ships we offer a wide range of brass propellers and ship's propellers from Raboesch. Our ship propellers range from the 2-blade to the 7-blade submarine propeller. In addition, we also offer CNC manufactured racing screws made of aluminium and stainless steel.

The model ship controller

For the engine control of model ships a model ship controller is necessary. This enables the remote control of the engine speed. In the past, mechanical speed controllers were used, which permanently emitted electricity. Today, the electronic controller, which only emits current pulses and thus offers a longer battery life, has become generally accepted. In our shop you will find controllers for DC motors with brush systems and brushless controllers for brushless DC motors.

31 From 46
No results were found for the filter!
Copper pipe soft 4x3mm 1m ring
Copper pipe soft 4x3mm 1m ring
Copper tube soft 4x3mm 1m ring Soft copper tube for individual production of steam pipes or cooling coils. Delivery 1 m rolled Dimensions Outer-Ø 4 mm Inner-Ø 3 mm Length 1000 mm
12.95€ *
magnets 12 x 7 x 2 mm
magnets 12 x 7 x 2 mm
Extremely strong magnets 12 x 7 x 2 mm. Square magnet neodymium, nickel-plated with high temperature resistance and holding force of approx. 1kg. 10 pcs
7.90€ *
Disc Magnet 6x3mm
Disc Magnet 6x3mm
Extremely strong magnets diameter 6x3 mm. Disc magnet neodymium, nickel-plated with high temperature resistance and holding force of approx. 900g. 10 pcs
5.90€ *
Quicrun Fusion SE Brushless Motor/Controler 1200kV
Quicrun Fusion SE Brushless Motor/Controler 1200kV
Hobbywing Quicrun Fusion SE 1200kV Motor and controller combined in one housing ! This brushless controller and motor combination is already the second improved version of the Quicrun Fusion. The Quicrun Fusion SE is just about the size...
76.15€ *
AKL-8-W Terminal Block
AKL-8-W Terminal Block
The AKL-8-W connection terminal enables convenient connection of LEDs and other consumers to the switching outputs of all common Beier Electronic switching modules. The module is NOT an extension of functions but merely a way of quickly...
18.95€ *
Data Cable USB - USM3
Data Cable USB - USM3
Data cable USB - USM3 With the data cable K-USB-2, the USM-RC-3 module can be connected directly to the PC via a USB interface. The Sound-Teacher software can receive and display live the current diagnostic data (e.g. position of the...
23.95€ *
Brass Pulley 3mm
Brass Pulley 3mm
Precise brass pulley, hole for shaft 1 mm dia. Content of package: 10 pcs
3.00€ *
Brass Pulley 5mm
Brass Pulley 5mm
Precise brass pulley, hole for shaft 1.5 mm dia. Content of package: 10 pcs
3.00€ *
Set Collar 3mm
Set Collar 3mm
Set collar 3 mm inside diameter Package contents: 5 Set collar with set screws and Allen key Technical data Inner diameter 3.1 mm Outer diameter 8 mm Width 5 mm
3.20€ *
Set Collar 4mm
Set Collar 4mm
Set collar 4 mm inside diameter Package contents: 5 Set collar with set screws and Allen key Technical data Inner diameter 4.1 mm Outer diameter 8 mm Width 4.5 mm
3.20€ *
Set Collar 5mm
Set Collar 5mm
Set collar 5mm inside diameter Package contents: 5 Set collar with set screws and Allen key Technical data Inner diameter 5.1 mm Outer diameter 10 mm Width 5 mm
3.50€ *
Delrin Bearing Bushes 4x5x8mm
Delrin Bearing Bushes 4x5x8mm
Delrin bearing bushes for 4mm shafts 2 bearing bushes made of Delrin for the construction of ship shafts. Delrin is characterized by high strength, hardness and rigidity over a wide temperature range. Its high abrasion resistance and low...
6.60€ *
Race 400 6V DC Motor
Race 400 6V DC Motor
Race 400 6V electric motor Inexpensive, robust electric motor. Suitable both in direct drive and with gearbox for single and multi-motor models. With the appropriate accessories such as motor mounts, gear sets and ball bearings, any...
10.60€ *
Suppression Set DC Motor
Suppression Set DC Motor
Suppression set for model brush motors consisting of 3 capacitors which must be soldered between the poles and the housing. prevents high frequency (HF) interference and is required by law, especially older remote controls are sensitive...
2.00€ *
Running Hardware Riva Aquarama V2 brushless
Running Hardware Riva Aquarama V2 brushless
A beautiful Riva model necessarily needs a powerful drive. With this set we have put together a drive that is fast but does not go to the limits of what is technically possible. The shafts are mounted on two bearings and are absolutely...
319.95€ *
Ro-Power Torque 3546 650 Kv
Ro-Power Torque 3546 650 Kv
Robbe Brushless Motor RO-POWER TORQUE 3546 650 Kv RO-Power Torque Brushless Motors are lightweight, powerful external rotor motors with high torque and efficiency. They do not require a gearbox and are suitable for a wide range of...
41.90€ *
Boost 60 490KV Brushless Motor
Boost 60 490KV Brushless Motor
Boost 60 Brushless Motor from Pichler Modellbau High quality external rotor brushless motor for large models. The motor is designed with 15 years of experience in model building and the claim to use only high-quality materials....
105.00€ *
Boost 50 610KV Brushless Motor
Boost 50 610KV Brushless Motor
Boost 50 Brushless Motor from Pichler Modellbau High quality external rotor brushless motor for large models. The motor is designed with 15 years of experience in model building and the claim to use only high-quality materials....
97.00€ *
Boost 80 320KV Brushless Motor
Boost 80 320KV Brushless Motor
Boost 50 Brushless Motor from Pichler Modellbau High quality external rotor brushless motor for large models. The motor is designed with 15 years of experience in model building and the claim to use only high-quality materials....
119.00€ *
ESC 90 Smart RC Speed Controller
ESC 90 Smart RC Speed Controller
The ISDT ESC 90 is a high quality speed controller (ESC) for use in RC models such as cars, rock crawlers and of course model boats that need to be controlled sensitively. The ESC 90 has a high current capability of up to 90(180) amps...
29.99€ *
ESC 70 Smart RC Speed Controller
ESC 70 Smart RC Speed Controller
The ISDT ESC 70 is a high quality speed controller (ESC) for use in RC models such as cars, rock crawlers and of course model boats that need to be controlled sensitively. The ESC 70 has a high current capability of up to 70(120) amps...
27.49€ *
Model Stand Flying Dutchman
Model Stand Flying Dutchman
Exclusive model stand for the Flying Dutchman ship model by Occre. The kit contains the following parts: - MDF wood - 2 brass tentacles - instructions Dimensions: Length: 300 mm width: 150 mm Height: 95 mm
45.00€ *
Disc Magnet 10x2mm
Disc Magnet 10x2mm
Extremely strong magnets diameter 10x2 mm. Disc magnet neodymium, nickel-plated with high temperature resistance and holding force of approx. 1,1kg. 10 pcs
5.95€ *
Single Block 3mm (100)
Single Block 3mm (100)
Blocks 3mm (100 pieces) Single block with one hole Single blocks are used for simple deflection of lines and sheets. Technical data length 3 mm Material walnut (dark) Quantity 100 pieces per packing unit
15.20€ *
Fittings Set Torben
Fittings Set Torben
Fittings set for the harbor tug Torben, consisting of all fittings such as radar, antennas, anchors, fenders, bollards, lanterns.
135.00€ *
Blocks 3mm light
Blocks 3mm light
Blocks 3mm light Single blocks 3 mm Single blocks for easy deflection of lines and sheets in boxwood (light). Technical data length 3 mm Material boxwood (light) Quantity 10 pieces
2.40€ *
Search Light Kit
Search Light Kit
Searchlight kit Kit of a modern searchlight made of etched nickel silver parts. Matching LED included in the set. The searchlight can be controlled by servos and can be turned and swivelled. Reflector approx. 18mm The headlight can be...
20.70€ *
High Power LED Headlight
High Power LED Headlight
High Power LED Headlight Ultra bright LED headlight pair with electronic switch, pre-wired. Can be connected AND switched immediately to a free channel of the remote control. An additional switch module is not necessary. Technical data:...
17.90€ *
Grating 55mm
Grating 55mm
Originally, wooden gratings were used to safely cover hatches in the deck of ships, while fresh air and light could pass through. The set consists of 30 pieces of laser cut strips that can be assembled into a cover of maximum 55x55mm....
2.95€ *
Cannon Portholes 8x8mm
Cannon Portholes 8x8mm
Piece ports (also gun ports) are closable openings in the side of warships through which cannons placed inside the ship, the pieces, could fire. Reproduction of a piece port for cutouts inner size 8x8mm made of metal movable. Scope of...
2.95€ *
Wantenspanner M1,2 x 13/18
Wantenspanner M1,2 x 13/18
Wantenspanner M1,2 x 13/18 Wantenspanner, Spannschloß oder Ösenschraube ..... aus Messing. Mit links/rechts Gewinde verändert sich die Länge des Wantenspanners. So können Wanten, Seile, Taue oder Züge einfach gespannt werden....
1.65€ *
Turnbuckle M2 x 22/35
Turnbuckle M2 x 22/35
Shroud turnbuckle M2 x 22/35 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1 piece...
1.55€ *
Shroud Turnbuckle M2 x 21/31
Shroud Turnbuckle M2 x 21/31
Shroud turnbuckle M2 x 21/31 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1 piece...
1.60€ *
Shroud Turnbuckle M2.5 x 27/43
Shroud Turnbuckle M2.5 x 27/43
Shroud turnbuckle M2.5 x 27/43 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1...
1.60€ *
Shroud Turnbuckle M2.5 x 32/49
Shroud Turnbuckle M2.5 x 32/49
Shroud turnbuckle M2.5 x 32/49 Shroud turnbuckle, turnbuckle or eyebolt ..... made of brass. With left/right thread changes the length of the shroud turnbuckle. So shrouds, ropes or cables can be easily tensioned. Scope of delivery 1...
1.70€ *
Sail kit Prins Willem
Sail kit Prins Willem
Sail kit Prins Willem Ready made sail set for the Sovereign of the Seas kit. Blocks, rings and rigging twine for rigging the sails are neither included in the kit nor in the sail set and must be purchased separately.
49.00€ *
31 From 46
Viewed