Running Hardware

Ship's shaft systems provide powerful propulsion and purposeful locomotion for model ships. The ship's shaft transmits the rotary motion of the motor directly to the ship's propeller, which is why there is only a slight loss of power. In order to ensure smooth sailing, a ship's shaft system consists of the stern tube, the shaft as well as the bearing, adjusting ring and seals. A complete propulsion system for a model ship consists of the motor and the components already listed. All parts are available in our online shop. To ensure that your model ship sets the right course, you should choose a shaft for the installation of the motor that matches your model. If you have any questions regarding the selection of a suitable ship's shaft, we will be happy to advise you!


Our range of ship shafts for model boats

Our range of ship shafts for model boats extends from racing boat ship shafts to Compact ship shafts and simple, inexpensive shafts for small boats. The slim Compact shafts consist of a brass stern tube, an aluminium motor mount (flange), a stainless steel shaft and a rigid motor coupling. The motor coupling is the connection from the motor drive shaft to the boat shaft. Rigid direct couplings cannot be shortened because the flange is glued to the sterntube and thus provides an aligned connection between the engine and the shaft.

Our cheaper and long shafts with bronze bearings and brass stern tubes are suitable for large model ships. The small, also inexpensive stainless steel ship shafts with brass stern tubes and self-lubricating bronze bushings and Teflon bearings should rather be used for small models without precision work. Our completely maintenance-free shafts for submarines, racing boats and scale models are self-lubricating and watertight. However, they cannot be shortened. Ship's shafts with ball bearings prove to be of great advantage, as the length can be adapted to the ship by shortening the stern tube and the stainless steel shaft. However, the load on the bearings should not be so high and the shafts should be installed in model ships with a low speed.

The right ship's shaft system for every model ship

In the JOJO model shop you will find bearing-mounted and maintenance-free shaft systems for your model ships. For simple drives on your model ship, we recommend the "300mm M4 ship's shaft system". This consists of a brass stern tube and a 4mm stainless steel shaft. It is mounted in two plain bearings. For larger ship models with a powerful drive we can recommend the "Ship's shaft system 255mm M4". Like all simple shaft systems, this one is secured on the motor side by means of an adjusting ring. If you are looking for a shaft system that can be shortened, you will also find it in our online shop. The "Shaft system 290/M4 can be shortened" is an example of a shaft system that can be shortened. This ship's shaft system was specially developed for fine scale models and submarines. The advantage: Absolute freedom from maintenance and it can be individually adapted!

Accessories for shaft systems

The motor is assembled and for a smooth drive of the ship's shaft system and for the complete assembly of the model drive you need further accessories? To equip the shaft system, you will find various types of couplings, coupling hoses, adapters for mounting on ship shafts or grease nipples for continuous greasing of the shafts and bearings in our shop. To prevent water from entering the stern tube, the ship's shaft should be greased regularly. For this purpose, you can obtain water-resistant shaft grease with corrosion protection in our online shop. Friction and wear are no longer a problem and the water remains free of pollutants. Thanks to our extensive equipment, you can set sail with your model ship without any worries!

 

 

« show less
Ship's shaft systems provide powerful propulsion and purposeful locomotion for model ships. The ship's shaft transmits the rotary motion of the motor directly to the ship's propeller, which is why there is only a slight loss of power. In order to ensure smooth sailing, a ship's shaft system consists of the stern tube, the shaft as well as the bearing, adjusting ring and seals.... read more »
Close window
Schiffswellenanlagen

Ship's shaft systems provide powerful propulsion and purposeful locomotion for model ships. The ship's shaft transmits the rotary motion of the motor directly to the ship's propeller, which is why there is only a slight loss of power. In order to ensure smooth sailing, a ship's shaft system consists of the stern tube, the shaft as well as the bearing, adjusting ring and seals. A complete propulsion system for a model ship consists of the motor and the components already listed. All parts are available in our online shop. To ensure that your model ship sets the right course, you should choose a shaft for the installation of the motor that matches your model. If you have any questions regarding the selection of a suitable ship's shaft, we will be happy to advise you!


Our range of ship shafts for model boats

Our range of ship shafts for model boats extends from racing boat ship shafts to Compact ship shafts and simple, inexpensive shafts for small boats. The slim Compact shafts consist of a brass stern tube, an aluminium motor mount (flange), a stainless steel shaft and a rigid motor coupling. The motor coupling is the connection from the motor drive shaft to the boat shaft. Rigid direct couplings cannot be shortened because the flange is glued to the sterntube and thus provides an aligned connection between the engine and the shaft.

Our cheaper and long shafts with bronze bearings and brass stern tubes are suitable for large model ships. The small, also inexpensive stainless steel ship shafts with brass stern tubes and self-lubricating bronze bushings and Teflon bearings should rather be used for small models without precision work. Our completely maintenance-free shafts for submarines, racing boats and scale models are self-lubricating and watertight. However, they cannot be shortened. Ship's shafts with ball bearings prove to be of great advantage, as the length can be adapted to the ship by shortening the stern tube and the stainless steel shaft. However, the load on the bearings should not be so high and the shafts should be installed in model ships with a low speed.

The right ship's shaft system for every model ship

In the JOJO model shop you will find bearing-mounted and maintenance-free shaft systems for your model ships. For simple drives on your model ship, we recommend the "300mm M4 ship's shaft system". This consists of a brass stern tube and a 4mm stainless steel shaft. It is mounted in two plain bearings. For larger ship models with a powerful drive we can recommend the "Ship's shaft system 255mm M4". Like all simple shaft systems, this one is secured on the motor side by means of an adjusting ring. If you are looking for a shaft system that can be shortened, you will also find it in our online shop. The "Shaft system 290/M4 can be shortened" is an example of a shaft system that can be shortened. This ship's shaft system was specially developed for fine scale models and submarines. The advantage: Absolute freedom from maintenance and it can be individually adapted!

Accessories for shaft systems

The motor is assembled and for a smooth drive of the ship's shaft system and for the complete assembly of the model drive you need further accessories? To equip the shaft system, you will find various types of couplings, coupling hoses, adapters for mounting on ship shafts or grease nipples for continuous greasing of the shafts and bearings in our shop. To prevent water from entering the stern tube, the ship's shaft should be greased regularly. For this purpose, you can obtain water-resistant shaft grease with corrosion protection in our online shop. Friction and wear are no longer a problem and the water remains free of pollutants. Thanks to our extensive equipment, you can set sail with your model ship without any worries!

 

 

1 From 4
No results were found for the filter!
Kupplungsschlauch
Kupplungsschlauch
Kupplungsschlauch 5x1,2x50 mm Verbindet Wellen von 1,5 bis 2,5 mm Durchmesser
0.50€ *
Schiffswellenanlage M2 x 153mm Eco
Schiffswellenanlage M2 x 153mm Eco
Schiffswelle + Stevenrohr M2 x 153mm Eco
5.20€ *
Kupplung 3.2mm / 3mm Alu
Kupplung 3.2mm / 3mm Alu
Wellenkupplung 3.2mm / 3mm Alu Graupner ALU Kupplung
6.90€ *
navy Gelenkkupplung Stahl 5/5
navy Gelenkkupplung Stahl 5/5
Gelenkkupplung Stahl 11xL23mm, Bohrung 5/5
4.90€ *
Lagerbock mit Schmiernippel 8mm
Lagerbock mit Schmiernippel 8mm
Lagerbock mit Schmiernippel passend für Stevenrohre mit 8mm Außendurchmesser
3.80€ *
Schiffswellenanlage 255mm M4
Schiffswellenanlage 255mm M4
komplette Wellenanlage für RC Modell Schiffe 4mm Edelstahlwelle und M4 Gewinde
11.00€ *
Wellenfett
Wellenfett
Wellenfett Tube mit 80g Gut haftendes und gegen Wasser, Säuren und Laugen beständiges Fett. Ideal zum Fetten von Schiffswellen, verhindert das Eintreten von Wasser über das Stevenrohr. - Extrem wasserbeständig - Breiter Temperatureinsatzbereich von -10°C bis +130°C - Reibung und Verschleiß werden durch spezielle Additive auf ein...
Content 80 Gramm (11.88€ * / 100 Gramm)
9.50€ *
Wellenfett 50g
Wellenfett 50g
für alle Gleit- und Wälzlager, ideal für Schiffswellen Tube mit feiner Spitze
Content 50 Gramm (14.00€ * / 100 Gramm)
7.00€ *
Kupplung 2.3mm / 4mm Alu
Kupplung 2.3mm / 4mm Alu
Wellenkupplung 2.3mm auf 4mm Graupner ALU Kupplung
6.90€ *
Kupplung 3.2mm / 4mm Alu
Kupplung 3.2mm / 4mm Alu
Wellenkupplung 3.2mm / 4mm Alu Graupner ALU Kupplung
6.90€ *
navy Gelenkkupplung Stahl 4/5
navy Gelenkkupplung Stahl 4/5
Gelenkkupplung Stahl 9xL23mm, Bohrung 4/5
4.90€ *
Hochlastkupplung 5/4 und 4/3.2
Hochlastkupplung 5/4 und 4/3.2
Hochlastkupplung mit D 5/4 auf 4/3.2 mm
19.95€ *
Schiffswellenanlage 130mm M4
Schiffswellenanlage 130mm M4
Schiffswellenanlage 130mm M4 Preisgünstige Schiffswelle aus Stahl mit Stevenrohr aus Messung. Gleitgelagert. Lieferung komplett mit Stellring und Kontermutter. Technische Daten Gewinde Schiffsschraube M 4 Stevenrohrdurchmesser 6 mm Stevenrohrlänge 90 mm Wellendurchmesser 4 mm Wellenlänge 130 mm
7.70€ *
Stellringe 4 mm
Stellringe 4 mm
Stellringe 4 mm Innendurchmesser Packungsinhalt: 5 Stellringe mit Gewindestiften und Innensechskantschlüssel Technische Daten Innendurchmesser 4,1 mm Außendurchmesser 8 mm Breite 4.5 mm
3.20€ *
Stevenrohr ABS 290 M4
Stevenrohr ABS 290 M4
Edelstahlschiffswelle mit dickwandigem ABS Stevenrohr und Bronze Gleitlagern.
16.95€ *
Stuffing Box MS 450 M5
Stuffing Box MS 450 M5
Schiffswelle mit Stevenrohr
59.95€ *
Compact Wellenanlage 280/135 M2
Compact Wellenanlage 280/135 M2
Compact Schiffswelle mit sehr gutem Preis/Leistungsverhältnis. Hervorzuheben ist die besonders schlanke Bauart.
16.50€ *
Compact Wellenanlage 400/155 M3
Compact Wellenanlage 400/155 M3
Compact Schiffswelle mit sehr gutem Preis/Leistungsverhältnis. Hervorzuheben ist die besonders schlanke Bauart.
16.50€ *
Compact Wellenanlage 400/175 M3
Compact Wellenanlage 400/175 M3
Compact Schiffswelle mit sehr gutem Preis/Leistungsverhältnis. Hervorzuheben ist die besonders schlanke Bauart.
16.50€ *
Compact Wellenanlage 600/175 M3
Compact Wellenanlage 600/175 M3
Compact Schiffswelle mit sehr gutem Preis/Leistungsverhältnis. Hervorzuheben ist die besonders schlanke Bauart.
17.50€ *
Compact Wellenanlage 600/175 M4
Compact Wellenanlage 600/175 M4
Compact Schiffswelle mit sehr gutem Preis/Leistungsverhältnis. Hervorzuheben ist die besonders schlanke Bauart.
16.40€ *
Compact Wellenanlage 600/190 M4
Compact Wellenanlage 600/190 M4
Compact Schiffswelle mit sehr gutem Preis/Leistungsverhältnis. Hervorzuheben ist die besonders schlanke Bauart.
16.90€ *
Compact Wellenanlage 600/220 M4
Compact Wellenanlage 600/220 M4
Compact Schiffswelle mit sehr gutem Preis/Leistungsverhältnis. Hervorzuheben ist die besonders schlanke Bauart.
17.50€ *
Prop Adapter D2-M4
Prop Adapter D2-M4
Adapter vom 2mm Welle auf M4
2.50€ *
Stuffing Box 290/M4 can be shortened
Stuffing Box 290/M4 can be shortened
Schiffswellenanlage mit 290mm und M4 Gwinde. Wasserdicht - kürzbar- wartungsfrei !
29.60€ *
propeller shafts 290/M4 cut to size
propeller shafts 290/M4 cut to size
wartungsfreie Schiffswellenlage wasserdicht durch G Ring gut kürzbar schlanke Bauart
29.60€ *
Schiffswellenanlage 155mm M4
Schiffswellenanlage 155mm M4
Preiswerte Wellenanlage für Schiffsmodelle. Die 3mm Edelstahl Welle läuft leicht auf 2 Bronzelagern im Messing Stevenrohr. schraubenseitig befindet sich ein Teflon Drucklager. Die Welle wird über einen Stellring motorseitig gesichert.
9.50€ *
Running Hardware 185mm M4
Running Hardware 185mm M4
Preiswerte Wellenanlage für Schiffsmodelle. Die 3mm Edelstahl Welle läuft leicht auf 2 Bronzelagern im Messing Stevenrohr. schraubenseitig befindet sich ein Teflon Drucklager. Die Welle wird über einen Stellring motorseitig gesichert.
9.50€ *
Running Hardware 170mm M4
Running Hardware 170mm M4
Preiswerte Wellenanlage für Schiffsmodelle. Die 3mm Edelstahl Welle läuft leicht auf 2 Bronzelagern im Messing Stevenrohr. schraubenseitig befindet sich ein Teflon Drucklager. Die Welle wird über einen Stellring motorseitig gesichert.
9.50€ *
Navy Kardan 35
Navy Kardan 35
Navy Kardan 35 Schiffskupplung für Welle und Motor
6.50€ *
Ship Coupling
Ship Coupling
Ship Coupling
4.50€ *
Cardan Style Coupling
Cardan Style Coupling
Diese Kardankupplungen passen zu E-Motoren und Verbrennungsmotoren bis 2,5 ccm. Sie sind aus sehr robustem Nylon hergestellt. 26 Zähne sorgen für eine sichere Verbindung zwischen Kardan und Einsatzstück.
12.40€ *
Kardan Kreuzgelenk einzeln
Kardan Kreuzgelenk einzeln
Schiffskupplung Kreuzgelenk Kardan Kupplung
6.95€ *
Propeller Shaft M2x180mm
Propeller Shaft M2x180mm
komplette Schiffswellenanlage M2 mit Bronze und Messing Lagern
19.95€ *
stuffing box M4 290mm BB
stuffing box M4 290mm BB
kugelgelagerte Schiffswelle , einkürzbar. geeignet für besonders große Modell Schiffe  
43.80€ *
Schiffswelle M5 kugelgelagert 290mm
Schiffswelle M5 kugelgelagert 290mm
kugelgelagerte Schiffswelle M5 , einkürzbar. geeignet für besonders große Modell Schiffe  
45.90€ *
1 From 4
Viewed