Remote Control Systems

Remote control

All model ships that are to fly across the lake or play a sound require a remote control system. The elementary device here is the right remote control. In addition to transmitters, receivers and servos, you will find further modules and features for your model ship in the JOJO Schiffsmodell-Shop.

Receivers, servos, expansion and switching modules for model ships

Remote controls with at least 2 channels are a prerequisite for controlling model ships. In our online shop you will find the right receiver for 4 to 9 channel remote controls. Each receiver has different strengths and features. Therefore, pay attention to what features you need in the receiver. Important criteria when choosing a receiver are, for example, the reaction time, range and how many channels the receiver should and can be assigned to. Generally, our receivers have a new Hopping Telemetry Transmission high-frequency unit with high-quality components and state-of-the-art software due to innovative technology. To be able to switch functions by remote control, an RC remote control with a free channel and a switch module/switch are required. With this you can then control accessories such as lights, winches or sound by remote control.

Beginner set remote control

We have put together two different remote control sets for model ship captains. Here you have all the necessary components for controlling a ship perfectly coordinated.  The starter set includes a 2-channel control system, a speed controller for the drive motor, a high-capacity battery and a simple charger.  The Nautik Starter Set contains a branded remote control with 4 channels from Kyosho and a speed controller for a brushed electric motor as well as a powerful servo for the rudder Adjustment.

Extension modules for remote controls


In addition to the classic components of a remote control, you can expand the technology of your remote control. Ship models can be equipped with many additional special functions. Expansion modules and components for remote control systems of the FUTABA® F series make it possible to install multi-switch/prop modules and up to 16 additional switching channels in the remote control.

Video transmission for model ships

Driving model ships is an experience worth capturing with a camera. Video transmission is a great gadget for this. That is why we offer a high-quality video transmitter for transmitting video images in our online shop for model ships. The transmitter is practically small and very powerful. In addition, it is very easy to connect to cameras with SMA connection.

What are model radio remote controls?

With the radio remote control, the pilot operates switches and levers which are translated by the transmitter of the control unit into radio signals and sent to the receiver. The receiver decodes the signals and transmits them to the control elements such as servos, speed controllers or multi-switches of the model vehicle. Typical examples of such control functions are the rudder on a ship, changing the speed of an engine, switching lights or playing sounds.

Multi-channel remote controls

Radio remote controls differ essentially in the number of channels with which functions can be controlled. A control with 2 channels can only influence the speed and direction of a model (e.g. a car). An 8-channel remote control allows you to control at least eight functions. When buying a new radio control system, plan how many functions it will control.

Transmission frequencies of remote controls

In Germany, the frequency ranges 27 MHz, 35 MHz, and 40 MHz are designated for radio transmission in model making, whereby the 35 MHz range may only be used for aircraft. However, remote controllers in these frequency bands are obsolete and are almost no longer offered. For model boats, however, the 40 MHz controllers still have clear advantages in terms of range on the water.

The newer 2.4 GHz technology represents a clear leap forward in quality, the transmission capacity is much higher and, thanks to coded transmission of the control commands, many more models can be operated simultaneously in one place without the signals duplicating and influencing each other.

Types of remote controls

There are 3 main types of control systems. Pistol grip, console and handheld remote controls.

Pistol grip remote controls are held like the grip of a pistol due to their design and are mainly used for RC model cars as well as in model ship building for racing boats. Pistol controls have 2-3 channels - leaving one channel for a special function.

Console and hand-held remote controls are mainly used for controlling helicopters and aeroplanes, and for model ships with many special functions. Handheld transmitters must be held during operation. Console transmitters have a strap so that enough fingers are free to finely control the sticks and also have a support surface for the heel of the hand.

Telemetry

The latest generation of remote controls often have built-in telemetry transmission.
Sensor readings such as temperature or voltage of the drive battery are sent back directly from the model's receiver to the remote control and shown on the display. This means that you can always see whether there is still enough driving time or whether the motor or speed controller is overheating.

Manufacturers of radio remote controls

There is a wide range of manufacturers offering various control systems. Well-known brands include Multiplex, Jeti-Duplex, Futaba FHSS and FASST, Graupner HoTT, Kyosho and Spektrum. The manufacturers of remote controls have developed different transmission protocols for their remote controls in the 2.4GHz range. These protocols must match between transmitter and receiver. As a rule, receivers and transmitters from different manufacturers are not compatible.

 

 

« show less
Remote control All model ships that are to fly across the lake or play a sound require a remote control system. The elementary device here is the right remote control. In addition to transmitters, receivers and servos, you will find further modules and features for your model ship in the JOJO Schiffsmodell-Shop. Receivers, servos, expansion and switching modules for model ships Remote... read more »
Close window
Fernsteuerungen für Schiffsmodelle

Remote control

All model ships that are to fly across the lake or play a sound require a remote control system. The elementary device here is the right remote control. In addition to transmitters, receivers and servos, you will find further modules and features for your model ship in the JOJO Schiffsmodell-Shop.

Receivers, servos, expansion and switching modules for model ships

Remote controls with at least 2 channels are a prerequisite for controlling model ships. In our online shop you will find the right receiver for 4 to 9 channel remote controls. Each receiver has different strengths and features. Therefore, pay attention to what features you need in the receiver. Important criteria when choosing a receiver are, for example, the reaction time, range and how many channels the receiver should and can be assigned to. Generally, our receivers have a new Hopping Telemetry Transmission high-frequency unit with high-quality components and state-of-the-art software due to innovative technology. To be able to switch functions by remote control, an RC remote control with a free channel and a switch module/switch are required. With this you can then control accessories such as lights, winches or sound by remote control.

Beginner set remote control

We have put together two different remote control sets for model ship captains. Here you have all the necessary components for controlling a ship perfectly coordinated.  The starter set includes a 2-channel control system, a speed controller for the drive motor, a high-capacity battery and a simple charger.  The Nautik Starter Set contains a branded remote control with 4 channels from Kyosho and a speed controller for a brushed electric motor as well as a powerful servo for the rudder Adjustment.

Extension modules for remote controls


In addition to the classic components of a remote control, you can expand the technology of your remote control. Ship models can be equipped with many additional special functions. Expansion modules and components for remote control systems of the FUTABA® F series make it possible to install multi-switch/prop modules and up to 16 additional switching channels in the remote control.

Video transmission for model ships

Driving model ships is an experience worth capturing with a camera. Video transmission is a great gadget for this. That is why we offer a high-quality video transmitter for transmitting video images in our online shop for model ships. The transmitter is practically small and very powerful. In addition, it is very easy to connect to cameras with SMA connection.

What are model radio remote controls?

With the radio remote control, the pilot operates switches and levers which are translated by the transmitter of the control unit into radio signals and sent to the receiver. The receiver decodes the signals and transmits them to the control elements such as servos, speed controllers or multi-switches of the model vehicle. Typical examples of such control functions are the rudder on a ship, changing the speed of an engine, switching lights or playing sounds.

Multi-channel remote controls

Radio remote controls differ essentially in the number of channels with which functions can be controlled. A control with 2 channels can only influence the speed and direction of a model (e.g. a car). An 8-channel remote control allows you to control at least eight functions. When buying a new radio control system, plan how many functions it will control.

Transmission frequencies of remote controls

In Germany, the frequency ranges 27 MHz, 35 MHz, and 40 MHz are designated for radio transmission in model making, whereby the 35 MHz range may only be used for aircraft. However, remote controllers in these frequency bands are obsolete and are almost no longer offered. For model boats, however, the 40 MHz controllers still have clear advantages in terms of range on the water.

The newer 2.4 GHz technology represents a clear leap forward in quality, the transmission capacity is much higher and, thanks to coded transmission of the control commands, many more models can be operated simultaneously in one place without the signals duplicating and influencing each other.

Types of remote controls

There are 3 main types of control systems. Pistol grip, console and handheld remote controls.

Pistol grip remote controls are held like the grip of a pistol due to their design and are mainly used for RC model cars as well as in model ship building for racing boats. Pistol controls have 2-3 channels - leaving one channel for a special function.

Console and hand-held remote controls are mainly used for controlling helicopters and aeroplanes, and for model ships with many special functions. Handheld transmitters must be held during operation. Console transmitters have a strap so that enough fingers are free to finely control the sticks and also have a support surface for the heel of the hand.

Telemetry

The latest generation of remote controls often have built-in telemetry transmission.
Sensor readings such as temperature or voltage of the drive battery are sent back directly from the model's receiver to the remote control and shown on the display. This means that you can always see whether there is still enough driving time or whether the motor or speed controller is overheating.

Manufacturers of radio remote controls

There is a wide range of manufacturers offering various control systems. Well-known brands include Multiplex, Jeti-Duplex, Futaba FHSS and FASST, Graupner HoTT, Kyosho and Spektrum. The manufacturers of remote controls have developed different transmission protocols for their remote controls in the 2.4GHz range. These protocols must match between transmitter and receiver. As a rule, receivers and transmitters from different manufacturers are not compatible.

 

 

1 From 4
No results were found for the filter!
Nautik Beginner Set
Nautik Beginner Set
5 Kanal 2.4GHz Fernsteuerung FHSS, Frequenzhopping über bis zu 75 Kanäle 4 Knüppelmodes (MODE 1, MODE 2, MODE 3, MODE 4)
95.95€ *
Battery Holder 4xAA
Battery Holder 4xAA
Battery holder or battery box suitable for 4 commercially available AA Mignon cells. With JR plug fits directly into all R/C receivers of model cars, ships or airplanes. Please take care NOT to connect battery holder AND speed controller with activated BEC to a receiver! Technical data Dimensions = 58 x 32 x 28.5mm Weight = 11g Cable...
2.95€ *
Standardservo 4503C BB Digital
Standardservo 4503C BB Digital
Standardservo 4503C BB Digital kugelgelagert spritzwassergeschützt
13.00€ *
Futaba F-14/FC-16 3-Pos. Schaltkanal
Futaba F-14/FC-16 3-Pos. Schaltkanal
Futaba F14 / FC-16 3-Positionen Schaltkanal Multi-Bausteine Futaba F-Serie
22.90€ *
RO-BEC 6A Empfängerstromversorgung
RO-BEC 6A Empfängerstromversorgung
Die Robbe RO-BEC´s sind sehr leistungsfähige separate Spannungsversorgungen für RC Modelle aller Art. Um den heutigen Anforderungen gerecht zu werden verfügen die getakteten Schalt-BEC´s über eine wählbare Ausgangsspannung von 5, 6 oder 7,4V für den Betrieb mit HV Servos. Die RO-BEC´s haben einen breiten Eingangsspannungsbereich von...
14.99€ *
Ultra Micro DS15 (L) 0.16kg
Ultra Micro DS15 (L) 0.16kg
Das Ultra Micro Digital Servo nur 1,5g für kleine und kleinste Modelle. Erhältlich in der Ausführung Motor/Kabel links (L) oder rechts (R). Technische Daten Betriebsspannung = 3,7 ... 5,0V Stellmoment = 0,16 Ncm / 160g @ 5V Stellgeschwindigkeit = 0,19s @ 45° Länge = 21,4 mm Breite = 12 mm Höhe = 6,0 mm Gewicht = 1,5 g...
12.95€ *
Multi Switch
Multi Switch
Graupner SXM Multi Schaltmodul elektronischer Schalter (Switch) zum Schalten von RC Funktionen über die Fernsteuerung. Beleuchtung Blinklicht etc.
29.90€ *
8 Kanal Empfänger GR-16 HoTT
8 Kanal Empfänger GR-16 HoTT
8 Kanal Empfänger GR-16 HoTT
89.00€ *
12 Kanal Empfänger GR-24 HoTT
12 Kanal Empfänger GR-24 HoTT
12 Kanal Empfänger GR-24 HoTT
129.00€ *
6 Kanal Empfänger GR-12L HoTT lose
6 Kanal Empfänger GR-12L HoTT lose
6 Kanal Empfänger GR-12L HoTT lose
53.00€ *
Starter Set RC Control Car/Boat
Starter Set RC Control Car/Boat
RC Fernsteuer Set für Einsteiger Fernsteuer Set für Modell Boote Einsteiger Fernsteuer Set für RC Car
99.00€ *
Standardservo 4506C BB Digital
Standardservo 4506C BB Digital
Standardservo 4506C BB Digital kugelgelagert spritzwassergeschützt
15.00€ *
Segelwinde Windforce 1006MG
Segelwinde Windforce 1006MG
Segelwinde mit Metallgetriebe Segelwindenservo mit 6 Umdrehungen
66.00€ *
Transmitter Set Master GigaProp 4 Channal
Transmitter Set Master GigaProp 4 Channal
basic 4ch transmitter included KR-631WT receiver
59.00€ *
Standard Servo 3kg S3003BB
Standard Servo 3kg S3003BB
Leistungsstark, zuverlässige Leistung - zu einem außergewöhnlich guten Preis! Standard Servo mit Top Zugkraft !
11.00€ *
Mini Servo 3kg S0270 MG BB
Mini Servo 3kg S0270 MG BB
Leistungsstark, zuverlässige Leistung - zu einem außergewöhnlich guten Preis! Mini Servo mit Top Zugkraft !
12.50€ *
Duo Switch Schaltmodul
Duo Switch Schaltmodul
Schaltmodul 2. Kanal Memory
30.50€ *
Fernsteuerung MZ-18 Hott 9 Kanal Sender
Fernsteuerung MZ-18 Hott 9 Kanal Sender
Graupner mz-18 HoTT Fernsteuerung (9-Kanal) S1005.77 Die Graupner Fernsteuerung mz-18 mit 9 Kanälen ist der perfekte Sender für nahezu alle Flugmodelle. Der Sender eignet sich besonders für fortgeschrittene RC-Piloten. Die bewährte Graupner 2,4 GHz HoTT-Technologie garantiert störungs- und verzögerungsfreie Übertragung, auch über hohe...
399.00€ * 299.00€ *
Fernsteuerung MASTER GigaProp 6 Set
Fernsteuerung MASTER GigaProp 6 Set
preisgünstige 6 Kanal Fernsteueranlage Kanäle 5 und 6 können auf Kippschalter und/oder Drehregler gelegt werden.
105.00€ *
FS 510 BB MG 9.35kg Digital Servo
FS 510 BB MG 9.35kg Digital Servo
ROBBE FS 510 BB MG Servo mit Teil- Aluminium Gehäuse, Digital Das Robbe FS 510 BB MG Digital ist ein sehr starkes und robustes Standard-Servo. Das Vollmetallgetriebe ist extrem widerstandsfähig, auch bei schlagartigen Belastungen, wie z.B. Wölbklappen in Motorflugzeugen, großen Segelflugzeugen oder als Lenkservo in RC-Cars. Das Gehäuse...
23.95€ *
Servo 180 Grad FS 180 BB MG HV 2.7 kg Digital
Servo 180 Grad FS 180 BB MG HV 2.7 kg Digital
Das Robbe FS 180 BB MG HV ist ein neues Hochvolt Servo der 11mm-Klasse mit einem Vollmetallgetriebe und Abtriebsrad/-welle aus Stahl, welche für extreme Belastungen und Langlebigkeit ausgelegt wurden. Das Gehäuse besteht aus schlagfestem, zähem Kunststoff, der extrem temperaturstabil ist. Motor und digitale Steuerungselektronik...
21.95€ *
FS 0009 9G 1.5kg Servo
FS 0009 9G 1.5kg Servo
Robbe "ROVOR" High Performance Servo Serie Typ 10-14,9mm Motor 3 Pol Speed 60° (sec) 4,8V 0,12 Stellkraft (KG) 4,8V 1,2 Kabel 180mm Stecker JR/Futaba Zähne 21 Arbeitstemperatur in °C -10° bis +50° Arbeitswinkel 45° einseitig 500µsec Stromverbrauch 4,8V 10mA Ruhezustand, 260mA Leerlauf Stromverbrauch 6,0V 10mA Ruhezustand,...
6.99€ *
Mini Servo FS 151 MG 2kg
Mini Servo FS 151 MG 2kg
Das FS 151 ist ein analoges Mini-Servo der typischen 9g-Klasse und biete ein weites Einsatzspektrum im RC Flugbereich. Es ist ein kostengünstiges Qualitätsservo für Park- und Schaumflieger. Die Robbe FS Servos sind qualitativ hochwertige und präzise gefertigte Rudermaschinen für den RC Bereich. Durch den hohen Fertigungsstandard und...
15.95€ *
FS 0090 MG BB HV 9kg Servo
FS 0090 MG BB HV 9kg Servo
"ROVOR" High Performance Servo Serie Das Rovor S0090 MG BB HV ist ein sehr starkes und robustes Standard-HV-Servo. Das Vollmetallgetriebe ist extrem widerstandsfähig, auch bei schlagartigen Belastungen, wie z.B. Wölbklappen in Motorflugzeugen, großen Segelflugzeugen oder als Lenkservo in RC-Cars. Das Gehäuse besteht aus einem...
16.99€ *
Sailing Winch Windforce 2207HV
Sailing Winch Windforce 2207HV
Sailing winch Windforce 2207HV Sailing winch in standard servo size for large sailing yachts. Also for direct operation on a 2S LiPo battery up to 8.4V. A special feature of the Windforce sailing winch series is the encapsulated winch drum. Thus, the sheet is guided and can not jump from the drum is. With the Windforce 2206 digital...
99.90€ *
Sound Module USM-RC-3
Sound Module USM-RC-3
Sound Module USM-RC-3 Probably the best and most versatile sound module on the market. The module was developed especially for RC model building, in order to equip driving models with true to original and speed-dependent sounds and in addition extensive lighting options and additional servo movements / additional functions to realize....
189.00€ *
Switch RC-SM-4
Switch RC-SM-4
With the switching module RC-SM-4, lights and other loads (e.g. motors, pumps, relays) can be switched directly via a channel of an RC remote control. There are 4 outputs available on the switch module, which can be loaded with a current of up to 4 A. However, the total current of all outputs must not exceed 10 A. The states of the 4...
26.95€ *
Receiver 6 Chanal
Receiver 6 Chanal
Replacement receiver for GigaProp Series 2.4Ghz 4-6.5V
27.95€ *
Electronic Switch 7A Load
Electronic Switch 7A Load
electronic switch - 7A load switch for consumers. Remote controlled electronic (on/off) switch that can switch smoke generators or high load consumers with a toggle lever on your remote control. (On/Off) Important note! This switch is not a receiver power supply and cannot replace it. Technical data Operating voltage = 4.0 - 8.4V Input...
14.95€ *
DC Voltage Regulator UBEC 5A
DC Voltage Regulator UBEC 5A
The UBEC uses a high-performance DC voltage regulator with switching module that draws its voltage from 2-8S LiPos. With it the regulator gives out 5A extremely stable or for a short amount of time 15A.Therefore this UBEC provides power for all kinds of RC modell devices. Features: -Highly efficient DC-DC regulator chip for a...
15.90€ *
Hint!
Fernsteuerung Tandem X18 868Mhz/2.4Ghz
Fernsteuerung Tandem X18 868Mhz/2.4Ghz
Fernsteuerung Tandem x18 Sender bis zu 24 Kanäle sind möglich. Wenn Sie in eine neue RC Fernsteueranlage investieren ist zuerst zu überlegen, welche Anforderungen für Sie wichtig sind. Die FrSky Tandem X18 liegt gut in der Hand und hat 24 Kanäle die über den farbigen Touch Screen leicht zu programmieren sind. Die TANDEM X18...
359.00€ *
FS-ST8 Digi Prop Radio Control System
FS-ST8 Digi Prop Radio Control System
Flysky FS-ST8 remote control with 8-10 channels FS-ST8 upgrade version with 8 channel receiver. The ST8 transmitter from FlySky will quickly become your new best friend when controlling RC models. Through the countless possibilities, the remote control can be optimally set up to your own needs. A built-in STM32 chip of the new G series...
93.65€ *
FS-ST8 Upgrade Digi Prop Radio Control System
FS-ST8 Upgrade Digi Prop Radio Control System
Flysky FS-ST8 remote control with 8-10 channels FS-ST8 with 8 channel receiver. Upgrade version - additional buttons/switches , return spring/adjustor for all gimbals and bracket for RF range extender. FlySky's ST8 transmitter will quickly become your new best friend when controlling RC models. Through the countless possibilities,...
122.45€ *
FS 151 BB MG HV 140° Servo
FS 151 BB MG HV 140° Servo
Stellwinkel mit 140 Grad
15.95€ *
FS 166 BB MG HV 120° Digital Servo
FS 166 BB MG HV 120° Digital Servo
Stellwinkel mit 120 Grad
21.95€ *
Standard Servo S4020 6kg
Standard Servo S4020 6kg
Standardservo mit Kugellager und robustem Kunststoffgetriebe. Das preisgünstige Allround-Servo für Flug, Auto und Schiff. Technische Daten Betriebsspannung = 4,8 -6,0V Stellkraft = 5,0 / 6,0kg Stellzeit = 0,10 / 0,09s @ 45° Breite = 20,0mm Länge = 40,0mm Höhe = 38,0mm Gewicht = 37,0g 25 Zähne Analog Servo Kunststoffgetriebe Kugellager...
13.95€ *
1 From 4
Viewed